EVG Stirrup Bender

Stirrup bender to produce stirrups and bars.

Year: 2007

Automatic setting of wire guides and straighteners.
Condition: very good, machine cleaned and all straightening and driving rollers changed to new ones!

Wire diameter ranges for single wire: 6,0 – 16,0 mm
Wire diameter ranges for double wire: 6,0 – 12,0 mm

RA-XE 16/6 Straightening and Bending

FOR SALE
Rotor straightening and cutting machine EVG-FILZMOSER RA-XE 16/6 with double bending
Year of construction 1999, with 2 movable bending heads at the outfeed table
6 wire tracks for wire diameter: 6-16mm
Production direction from left to right
In very good condition, regularly serviced by EVG-FILZMOSER

TOP ADVANCED TECHNOLOGY

for the production of mesh sheets and reinforcing panels. Top condition
Fully automatic, Year of manufacture: 2010
No changeover time needed for production of different sheet shapes
Including automatic bending stations for cross and line wire overhangs
Diameter of longitudinal bars of a mesh from coil (or rod): 6-16 mm (18-20 mm)
Diameter of transverse rods from coils: 6-16 mm
Length of the longitudinal bars of the mesh: 300-12000 mm
Length of transverse rods: 300-4000 mm
The largest element 4000 x 12000 mm
The smallest element 500 x 800 mm
The maximum weight of welded panels (meshes) is 700 kg
The maximum weight of a unit surface of welded elements is 30 kg/m2

Stirrup Bending Machine Model PROGRESS EBAs 14/16

appropriate for wire diameters 6mm up to 14/16mm
Double-Wire-Production from 6mm to 10mm
5 pieces wire pay-offs, with brakes and coil holders
Diameter change is semi-automatic with feeding rollers
Wire coils max. 3.5tons
Fully electric driven

Complete Line, including stacker – FOR SALE

Year 1992
Girder height : 70 to 300 mm (steplessly)
Girder width : 65 to 85 mm
Top wire : 5 to 12 mm
Stirrups : 4 to 6 mm
Bottom wires : 5 to 12 mm
Girder length : 1 to 12 m

Power supply : 400 V / 50 Hz / 3 cycles / 150 KVA

Rebar Cutting like NEW:
Year: 2015
Condition: like a new machine, was only used in test run.
The FLEXIPLUS is an automatic system for cutting to length of bar material. The machine is very flexible and allows the cutting of bars to length, the automatic collection of the positions in different compartments and bending of the bars at both ends.
Specification:
– bar thickness from 8mm to 40mm (#2 – #8)
– number of rods cut at once: 1 – 9 pieces, depending on diameter
– minimum/ Maximum cutting length: 800mm up to 12m

Stirrup Bender MEP FORMAT S

Fully refurbished
Year: 2000
Dismantled and ready for loading
2 pcs Wire Pay-Offs with brake,
2 pcs coil holder
All accessories
Double wire: 8-12mm

Automatic Stirrup Bender

Model: Twinmaster 12S
Condition: Revised. Fully Operational
Extras: Two Pay-Offs and Two Coil Holders
Other: Bar Code Scanner. A third pay-off can be delivered
Technical specifications:
Wire diameter Single strand: Ø 5-12,7 mm and double strand:      Ø 5-10 mm
Rate of feed, max. 110 m/min
Bending speed, max. 1500°/sec
Operating voltage 3 x 400/ V/50 Hz

Hyperbolic Rotor-Straightener – FOR SALE

Very smooth surface of the straightened wire bars
Use of wire coils, diameters 6 to 14mm
6 unwinding reels 6-14mm, alternatively 2×10 oder 12mm.
Production of straightened bars and
2 Bending units
Bar distribution conveyor
Chain conveyor with 100mm sections
Can be inspected during operation.

MEP MiniSyntax, 2001 – SOLD

Manufacturer: MEP SpA
Year: 2001
Condition: Refurbished
Auxiliary Mobile Straightening Device
Other: The machine is fully operative
-Single wire processing: Diameter Φ6mm-Φ16mm
-Double wire processing: diameter Φ6mm-Φ12mm
-4 pcs pay-offs and coil holders,
-automatic diameter change
-safety fences, 12m collection bench(in 3 parts)
-all pins and mandrels (for all diameters).

Rotor Straightening and Bending Machine

Ø6 – Ø16
4 pay-offs 3 Ton
Flying shears
12mtr outlet
Bending heads with automatic mandrel change
Collection truck 12 mtr
Year 2006

SCHNELL Formula 14 – already sold

Year: 2008
FULLY REFURBISHED
Working Hours: 17700
Two Pay-Offs and Two COIL Holders,
SAPIENS System
-Semi Automatic Diameter Change
-Single Strand dia: 6-14mm / #2 – #4
-Double Strand dia: 6-10mm / #2 – #3
-Max bending angle: 180°
-Central mandrels dia.: 20-70mm
-Max pulling speed: 150 m/min
-Max Bending speed: 1950°/sec
-Average electric power consumtion: 3kW

Lattice Girder Welding Line EVG TS 10-30

Girder height: min 70 mm max: 300 mm
Girder length: max 12000mm

Base width 40, 50, 60, 70, 80, 90, 100mm
Zigzag feed: 200mm

Wire diameter:
Top bar min: 5mm max: 12mm
Lower bar min: 4mm max: 12mm
Zigzag min: 3.5mm max: 6mm

Working speed max: 18m / min