Production system PRINZING ATLAS 300/300 A9316 ** SOLD **

Flexible production system PRINZING ATLAS

ready for immediate use
For the production of:
Septic tanks, pipes, tanks, rectangular shafts, manhole bases and products for road construction
Processed Material: stiff concrete

Manufacturing range: diameters 150 – 3500mm
Space requirement of basic machine:
approx. 13 500 x 6.000mm
Equipment:
Reversing traverse
Complete molds incl. sleeves
for production of concrete pools
1500/1500 up to 2700/2500

Produktionssystem PRINZING ATLAS 300/300 A9316

Production System PRINZING ATLAS 300/300 A9316

Request for more Information: please use this form Continue reading

Floor slabs pallets carousel AVERMANN A20354 ** SOLD **

220Floor slabs pallets carousel AVERMANN – FOR SALE

Purpose of Use:

Production of Floor Slabs with Lattice girders (Truss girders) also known as Filigree Slabs (the company FILIGRAN is producer of lattice girders) or Semi finished floors,

Advantage: low transport weight, second stage concreting will be done finally on site !

Output: Typical 1000 m2 (One Thousand Squaremeter) per shift by employing 8 workers

Pallets Cycle Time up to 6 minutes

Moving Casting Pallets:

Dimension: Width 2.20m by Length 9.30m, formwork on both sides of the pallets with 45° Chamfer, pallets are guided in the production process via rails and drive rollers

Floor slabs pallets carousel AVERMANN, A20354

Floor slabs pallets carousel AVERMANN, A20354

Request for more Information: please use this form Continue reading

Floor slabs pallets carousel A20356 ** SOLD **

Floor slabs pallets carousel A20356 – FOR SALE

Purpose of Use: Production of Floor Slabs with Lattice girders (Truss girders, Filigran Slabs)

also known as Filigree Slabs (the company FILIGRAN is producer of lattice girders) or semi finished floors,

Advantage: low transport weight, second stage concreting will be done finally on site !

Output: Typical 800 m2 per shift

Moving Casting Pallets:

Dimension: Width 2.50m by Length 17.50m, formwork on both sides of the pallets with 45° Chamfer, pallets are guided in the production process via ficed rollers and drive rollers

Floor slabs pallets carousel BUMAT A20356

Floor slabs pallets carousel BUMAT A20356

Request for more Information: please use this form Continue reading

Manhole Manufacturing Plant COLLE A20365 ** SOLD **

Used Manhole Manufacturing Plant COLLE Vibromatic 100/150 H150

Year of construction: 1991
Good, immediately operational state!
Production range: DN 1000 to DN 1500
Max. height: 1500 mm

Incl. discharge, cart brand REKERS
– Machinery frame
– Central vibrator
– Hydraulic aggregate
– Controller
– Header press
– Charging unit
– Base ring inserter
– Discharge-cart

Pallets circle, brand REKERS
Full automated crane manipulator, brand REKERS
Moulds DN 1000
Moulds DN 1500

Manhole Manufacturing Plant COLLE A20365

Manhole Manufacturing Plant COLLE A20365

Request for more Information: please use this form Continue reading

Precast Concrete Batching Plant LIEBHERR M21404 ** SOLD **

Ring pan intensive mixer RIM 1.0-M

WATCH VIDEO

Nominal capacity 1m3, filling quantity 1500L
– with row batcher 4 x 35 cbm
– elevator from the weigh belt into the mixer
– Binding agent storage 2 x 60 to
– Dosing equipment for aggregates, binder and water
– Weighing equipment
– Dosing control SteKa incl. switch cabinet and E-installation

 

Betonmischer

Batching Plant

Request for more Information: please use this form Continue reading

EVG Polybend PBC 16mm A9321 ** SOLD **

EVG Stirrup Bender

Stirrup bender to produce stirrups and bars.

Year: 2007

Automatic setting of wire guides and straighteners.
Condition: very good, machine cleaned and all straightening and driving rollers changed to new ones!

Wire diameter ranges for single wire: 6,0 – 16,0 mm
Wire diameter ranges for double wire: 6,0 – 12,0 mm

EVG Polybend PBC 16mm

EVG Polybend PBC 16mm A9321

Request for more Information: please use this form Continue reading

Column Mould 52m SCHWINGHAMMER A20392 ** SOLD **

Column and Beam Mould

Manufacturer: SCHWINGHAMMER,
Year of manufacture: 1995
Formwork elements, consisting of:
– 4 pieces each 10 meters long, each with 5 pieces 250V Bosch external vibrators
– 1 piece with 12 meters length and 6 pieces 250V Bosch external vibrator
The basic width of each formwork section is 2.42 metres.
Each formwork part has a height of 1.58 metres.
Condition: Good

 

Stützenschalung 52m

Column Mould 52m

Request for more Information: please use this form Continue reading

Concrete Mixing Plant A9343 ** SOLD **

Mixing Plant

Concrete Mixing Plant with 4 Silos.
Conveyors, Scalings, Control complete.
Fully operational.

Including:
-truck feeding silo
-Conveyor belt 28m/650mm
-Reversible conveyor belt 5,5m/800mm
-2 material silos each 96m3
-2 dosing belts 2,80m/500mm
-1 gravel weighing scale 2000kg
-Conveyor belt 8m/800mm
-1 TEKA Mixer 1,125Liter, 30KW

Request for more Information: please use this form Continue reading

EVG FIL RA-XE 16/6 Straightening and Bending Line 16mm A20381 ** SOLD **

RA-XE 16/6 Straightening and Bending

FOR SALE
Rotor straightening and cutting machine EVG-FILZMOSER RA-XE 16/6 with double bending
Year of construction 1999, with 2 movable bending heads at the outfeed table
6 wire tracks for wire diameter: 6-16mm
Production direction from left to right
In very good condition, regularly serviced by EVG-FILZMOSER

Straightening Line 16mm

EVG FIL RA-XE 16/6

Request for more Information: please use this form Continue reading

Tilting Table AVERMANN 15m X 4m A20386 ** SOLD **

Tilting Table FOR SALE

Year of construction = 2010, Manufacturer: Avermann Maschinenfabrik GmbH, Germany, total weight = 15.2 To

Consists of:
– 1 Hydraulic large surface table 15.0m x 4.0m (7.5 kN/m2, payload max. 40 To)
– 1 thermal oil heating register for tilting table
– 10 spanning beams
– 13 Brackets for vibrators

Kipptisch A20386

Tilting Table 15x4m A20386

Request for more Information: please use this form Continue reading

Concrete Tiles Production Plant SCHINDLER A9346 ** SOLD **

Fully Automatic Production Plant for concrete tiles

Year 2010, Brand: Schindler
The line can produce grinded, polished, washed and shotblasted tiles.
The batching plant is designed to feed two presses simultaneously, if needed.
Electric substation and air-compressors are included as well as filter press-pump.
Factory has stopped production since 2018.

Automatic Hermetic-Turntablepress TOP 9000/600T OCEM and further 28 positions, which are described more precise in a customised offer.

Beton Gehwegplattenfertigung SCHINDLER A9346

Concrete tile production plant SCHINDLER A9346

Request for more Information: please use this form Continue reading

Custom Made Reinforcing Mesh Plant EVG-FIL HFBE A9339 ** SOLD **

TOP ADVANCED TECHNOLOGY

for the production of mesh sheets and reinforcing panels. Top condition
Fully automatic, Year of manufacture: 2010
No changeover time needed for production of different sheet shapes
Including automatic bending stations for cross and line wire overhangs
Diameter of longitudinal bars of a mesh from coil (or rod): 6-16 mm (18-20 mm)
Diameter of transverse rods from coils: 6-16 mm
Length of the longitudinal bars of the mesh: 300-12000 mm
Length of transverse rods: 300-4000 mm
The largest element 4000 x 12000 mm
The smallest element 500 x 800 mm
The maximum weight of welded panels (meshes) is 700 kg
The maximum weight of a unit surface of welded elements is 30 kg/m2

EVG HFBE BFT Bewehrungsmatten

EVG HFBE Custom made Mesh

Request for more Information: please use this form Continue reading

Concrete Paving Slabs Plant A9338 ** SOLD **

Complete Production for Concrete Paving Slabs

ground concrete slabs/frost-resistant terrazzo
and structural panels with mixing plant and further processing
Years of construction from 1993 – 2007
Capacity: 750 – 950 m2 / 8 hours
Condition: Good, no repairs necessary
Consisting of:

  • Hermetic plate press HENKE UNI 2000
    7 stations – pressing pressure: 1000 to
  • forms: 40×40/60×40 each x5cm twice each
  • approx. 250 steel pallets
  • The backing layer concrete mixer
    TEKA 375 l mixer
  • Calibration machine 3-head S+H
  • Grinding machine 6-head S+H
  • Blasting machine SCHLICK, 60 cm passage width
  • Automatic packaging RIDDER
  • bucket conveyor REKERS
  • HENKE back layer mixer
  • bucket elevator for high silo

Concrete Paving Slabs A9338

Request for more Information: please use this form Continue reading

Automatic Reinforcement Center for Precast Floor Slabs A9304 ** SOLD **

01Steel Robot for Pick and Place A9304

Reinforcement Center for Pallet circulation places Rebars and Lattice girders

This used complete steel processing plant made by PROGRESS
has revolutionized the production of Floor Slabs with FILIGRAN lattice girders.

consisting of a fully automatic wire straightener
Cutting and bending machine, an 8-axis gantry robot and a lattice girder processing station
(Was in use for pallets size 2.51 x 9 m)

Plant components in detail:
1. Full Auto Multi Wire straightening and bending machine
with spacer automatic, cut bar magazine and chain magazine.
Machine type: PROGRESS MSR 16/5 – 2Bk / e SERVO-ASH
– Incl. 2 bending heads (only cranking)
– Wire diameters: 6-14 mm
– Wire run-off length 11 m

2. Lattice girders processing station
PROGRESS GTA 91 / s – LIFT 93
Consisting of a lattice girder storage rack, a lattice girder cutting machine and a lattice girder
buffer and positioning magazine + top bar welding system

3. 7-axis linear robot PROGRESS EPR
For fully automatic laying of the transverse reinforcement, the longitudinal reinforcement and the lattice girders on the pallets
Control System Siemens S5

Stahlbearbeitungsanlage PROGRESS

Steel Robot for Pick and Place

Request for more Information: please use this form Continue reading

Floor T-Beam Moulds 12pcs A8281 ** SOLD **

Floor T-Beam Moulds

Year of construction: 2007 (very little use)
Manufacturer: Macfab
150mm deep, 127mm wide
The set is self stressing 12 beams wide and consists
of 12 number 6.0m beds including the ends with safety barriers

Features:
Self Stressing unit no need for buried anchored ends.
Modular sections means bed lenght can vary.
Superior finish.
Special concrete cutting equipment is not needed.
A budget solution for pre-stressed flooring.
Size of beams give easy access and lifting onsite.

Floor T-Beam Moulds

Floor T-Beam Moulds

Request for more Information: please use this form Continue reading

MEP FLEXIPLUS 250/40 Cutting and Bending System A20377 ** SOLD **

Rebar Cutting like NEW:
Year: 2015
Condition: like a new machine, was only used in test run.
The FLEXIPLUS is an automatic system for cutting to length of bar material. The machine is very flexible and allows the cutting of bars to length, the automatic collection of the positions in different compartments and bending of the bars at both ends.
Specification:
– bar thickness from 8mm to 40mm (#2 – #8)
– number of rods cut at once: 1 – 9 pieces, depending on diameter
– minimum/ Maximum cutting length: 800mm up to 12m

Stangen Schneide- und Biegemaschine

Rebar Cutting and Bending

Request for more Information: please use this form Continue reading

Lattice girder welder PROGRESS A15084 ** SOLD **

16Lattice girder resistance welder PROGRESS – FOR SALE

Year 2012
380V/50Hz
Consists of body with welder, transformer, welding control unit and foot-switch.
Semi-manual operation
Type of lattice girder: KT 800
Girder height: 90-320mm
Max. diameter to weld: 12mm

THIS PRODUCT IS CATEGORIZED AS A BARGAIN AND ITS PRICE BELOW
EUR 10000

 

Gitterträger Schweissmaschine

Lattice girder resistance welder PROGRESS

Request for more Information: please use this form Continue reading

Small Double-Wall Carousel A20353 -150m2 per day ** SOLD **

Double-Wall Pallets Carousel EBAWE, Palette 6,5x3m

Carousel with pallets for the precast production of Double-Walls and Filigree Floors with Lattice Girders. Also appropriate to produce solid or sandwich walls or other precast products.

Possible Output up to 150m2 Double-Wall or 300m2 single floor elements.

Size of the circulating pallets 6.50m by 3.00m.

Small Double-Wall Carousel A20353

Small Double-Wall Carousel A20353

Request for more Information: please use this form Continue reading

Twin-Wall Carousel Production A20351 ** SOLD **

Twin-Wall Carousel Production WECKENMANN, VOLLERT – FOR SALE

for the production of Twin Walls, Filigree Floor Slabs, Solid Walls, Light Concrete Walls, Solid Floor Slabs, Sandwich Walls
Size of pallets: 3.80m x 10.80m
This carousel production is still in operation and consists of all equipment for a twin wall production, as this is: 34 pallets, turnover crane, curing chamber and pallets handling crane, cleaning, oiling and plotter, tilting table for finished twin walls, cart for the transport of wall to outside stock etc.
Condition: Very good, usual signs of wear

 

Twin-Wall Carousel Production A20351

Twin-Wall Carousel Production A20351

Request for more Information: please use this form Continue reading

EBAWE precast concrete form plotter A14054 ** SOLD **

Universal plotter – FOR SALE

Year: 2013
Condition: almost new, very good
Steuerung: PC und Steuerschrank
Moving area: max: 12975mm x 3813mm

The plotter marks slabs cutting lines, rectangles and circles for openings and recesses, texts for identification on cast slab surface or places for dividers and fittings on empty bed surface.

plotter

EBAWE plotter

Request for more Information: please use this form Continue reading

Straightening and Bending Machine EVG-FILZMOSER RA-XE 16/6 A9333 **SOLD**

Wire straightening line for precasters – SOLD

Straightening and Bending Machine EVG-FILZMOSER RA-XE
-Hyperbolic rotors, Year 2002
-Included 2 bending heads moveable attached to the run-off table
-Wire diameters: 2x6mm, 8, 10, 12, und 14mm
-Automatic Spacer Feeding, 2 Vibration pots
Condition: Very good, well maintained

EVG FIL RA-XE 166

EVG FIL RA-XE 166

Request for more Information: please use this form Continue reading

Column – Beam – Moulds, 3 pieces A9349 **ALREADY SOLD**

Column – Beam – Moulds – FOR SALE

Mould No.1
Year 1994. Max. Dimension 80 x 100cm, Length 24m (3 parts 1x12m, 2x6m)
Height 1.60m, Width over all 2.40m, 1-sided stroke, Shipping length 1x12m, 2x6m
Included: 12 vibrators
Mould No.2
Year 1995. Max. Dimension 80 x 80cm, Length 20m (3 parts 1x8m, 2x6m)
Height 1.51m, Width over all 2.40m, 1-sided stroke, Shipping length 1x8m, 2x6m
Included: 10 vibrators
Mould No.3
Year 1995. Max. Dimension 80 x 120cm, Length 20m (3 parts 1x8m, 2x6m)
Height 2.20m, Width over all 2.40m, 1-sided stroke, Shipping length 1x8m, 2x6m
Included: 10 vibrators

Stabteilschalungen

Column-Beam-Moulds

Request for more Information: please use this form Continue reading

Battery Mold ELEMATIC 3.03 X 8.0M, 7 Compartments, A9347 **SOLD**

Battery Mould – FOR SALE

In mint condition / not used, only 1 test process
Year of construction: 2010

Technical specifications:
7 pouring compartments, size: 3.03m x 8.0 m
1 fixed outer wall, thickness 780mm
6 movable partitions on rails, thickness 220mm
1 movable outer wall, thickness 780mm on rails
Incl. Work platform, stairs and railings
including external vibrators and
1 frequency converter and controller
1 hydraulic unit to close the battery mold
1 built-in heating register in outer and movable partitions

 

Battery Mould ELEMATIC

Battery Mould ELEMATIC

Request for more Information: please use this form Continue reading

Stirrup Bender Stema-Pedax Twinmaster 12S A9312 **SOLD**

Automatic Stirrup Bender

Model: Twinmaster 12S
Condition: Revised. Fully Operational
Extras: Two Pay-Offs and Two Coil Holders
Other: Bar Code Scanner. A third pay-off can be delivered
Technical specifications:
Wire diameter Single strand: Ø 5-12,7 mm and double strand:      Ø 5-10 mm
Rate of feed, max. 110 m/min
Bending speed, max. 1500°/sec
Operating voltage 3 x 400/ V/50 Hz

Bügelautomat Stema-Pedax Twinmaster 12S A9312

Stirrup Bender Stema-Pedax Twinmaster 12S A9312

Request for more Information: please use this form Continue reading

Sloped I-shaped Beam Mould – 38m A9329 **SOLD**

Prestressed Girder Mould

Combination Merten Mould and self-construction
Number of vibrators: 17 pcs. (Bosch company)
Control system: Yes
Traversing technology: hydraulic
Side formwork can be moved sideways to the right
Length max. 38 m
Max. width of upper chord 1012 mm
Mould: completely made of steel

Binderschalung Satteldachbinder - 38m A9329

Sloped I-shaped Beam Mould – 38m A9329

Request for more Information: Please use this form: Continue reading

Concrete Girder Mould – 63m – Prestressed A9328 **SOLD**

Sloped I-shaped Beam Mould

Fabricant: Ninive Casseforme, Italy
20 vibrators (Company Wacker)
Control system: Yes
Traversing technology: hydraulic
Side formwork left 150 mm laterally movable
Side formwork right 840 mm laterally movable
variable web height, 700 or 900 mm
Length of mould max. 63 m
Max. width of upper chord 400 mm

Binderschalung B2 63m A9328

Concrete Girder Mould 63m A9328

Request for more information: please use this form: Continue reading

Hyperbolic Rotor-Straightener RA-X EVG-FILZMOSER A16158 **SOLD**

Hyperbolic Rotor-Straightener – FOR SALE

Very smooth surface of the straightened wire bars
Use of wire coils, diameters 6 to 14mm
6 unwinding reels 6-14mm, alternatively 2×10 oder 12mm.
Production of straightened bars and
2 Bending units
Bar distribution conveyor
Chain conveyor with 100mm sections
Can be inspected during operation.

 

Hyperbolic Rotor-Straightener

Hyperbolic Rotor-Straightener

Request for more Information: please use this form Continue reading

Stirrup Bender MEP Minisyntax A9309 **SOLD**

MEP MiniSyntax, 2001 – SOLD

Manufacturer: MEP SpA
Year: 2001
Condition: Refurbished
Auxiliary Mobile Straightening Device
Other: The machine is fully operative
-Single wire processing: Diameter Φ6mm-Φ16mm
-Double wire processing: diameter Φ6mm-Φ12mm
-4 pcs pay-offs and coil holders,
-automatic diameter change
-safety fences, 12m collection bench(in 3 parts)
-all pins and mandrels (for all diameters).

Bügelautomat MEP Minisyntax A9309

Stirrup Bender MEP Minisyntax A9309

Request for more Information: please use this form Continue reading

Turn-Over Table 2pcs for Double-Wall production SOMMER A8240 **SOLD**

062 pcs used Turn-Over Tables for Double-Wall production

Brand: SOMMER
Year 2007, less used
Casting area: 7215 x 3140mm
Max. element size: 7100 x 3000mm
Max. Load: 11tons
Double-Wall Thickness: 180-400mm
Steel sheet 8mm, even face
Used for face concrete
Including:
E-Vibration
Converter
Control

Turn-Over Tables for Double-Wall production

Turn-Over Tables for Double-Wall production

Request for more Information: please use this form Continue reading

Prestressing casting bed equipment PAUL A9332 **SOLD**

for large concrete beams

Complete casting bed equipment from PAUL for prestressing large precast concrete beams and girders
For main reinforcement and upper reinforcement.
Abutment anchor posts,
transverse anchor plates,
detensioning equipment,
vertically adjustable supports,
guards
safety devices
detensioning cylinders with support sleeves

Spannbahnausrüstung A9332

Prestressing casting bed equipment PAUL A9332

Request for more Information: please use this form: Continue reading