Hydraulic Tilting Table 16m x 4.70m NUSPL M21410

Hydraulic tilting table

with 3 cylinders
Make NUSPL
Year of manufacture 2007
Upstands 3-sided height adjustable from 12 to 35 cm
Production dimension length: 16.00 m, width: 4.70 m
Plate thickness: 10mm !
Max. Load: 1000kg/m2
Surface in good condition
16 vibrators WACKER

Tilting Table M21410

Tilting Table M21410

Request for more Information: please use this form Continue reading

Hydraulic tilting table 11m x 4.50m NUSPL M21409

Hydraulic tilting table

with 3 cylinders
Make NUSPL
Year of manufacture 10/2000
upstands 3-sided height adjustable from 12 to 35 cm
Production dimension length: 11.00 m, width: 4.50 m
Plate thickness: 10mm !
Max. Load: 750kg/m2
Surface in good condition
9 vibrators BRECON

Kipptisch M21409

Tilting Table M21409

Request for more Information: please use this form Continue reading

Mesh Welding Line for Precasters EVG-FIL FBE-33 M21406

Mesh Welding Line for Precasters

WATCH VIDEO

for the production of order-related mesh for precast concrete producers.
Type: FBE 33, year of construction 1995, fully in operation until Dec. 2021,
2016 New BECKHOFF control system installed (previously B&R).
Output: depending on diameter used: up to 1000 m2 per shift.

REINFORCEMENT MESH:
Mesh dimensions: Width up to 3m, length up to 11m
min/max mesh width: 500mm/ 3000mm
min/max/ mesh length: 1000mm/ 11000mm

 

FBE 33

FBE 33

Request for more Information: please use this form Continue reading

Concrete Twin Wall Production Carousel A20397

WECKENMANN, VOLLERT

A complete pallets circulation plant for the production of Twin-Walls, Floor slabs with lattice girders or Solid walls.

WATCH VIDEO

Includes 56 moveable pallets (moulds), size 12500 mm x 3500 mm
Made by WECKENMANN and VOLLERT, consists of:
– Mixing plant from HARRUP, year of construction 2007, mixer 1,5m3, row batcher
– Automatic concrete spreader
– Cleaning and separating oil station
– Fully automatic shuttering robot with shuttering magazine
– Shuttering and magnets 75, 150, 250mm
– Vibration station
– Curing chamber, automatic storage of 69 pallets
– Turn-over crane VOLLERT
– Automatic reinforcement system with EVG/FILZMOSER RA-XE 16/6 straightening machine, lattice girder preparation and automatic reinforcement robot for laying bars and lattice girders

DW Palettenumlauf

Twin Wall CAROUSEL

Request for more Information: please use this form Continue reading

Concrete Pipe Plant DN300-DN2500 A20394

The plant consists

of two production lines, one fully automatic for pipes up to DN1200, and one semi-automatic for pipes up to DN2500, box culvert etc.
Location: Italy
Condition: is in very good shape and well maintained.
Year of construction: 2003, but has few hours, since it has worked very little since 2018.

Betonrohrfertigung

Concrete Pipe Production

Request for more Information: please use this form Continue reading

Concrete Twin-Wall and Floor Production Carousel A21399

Twin-Wall Carousel

Pallet circulation system for the production of double walls and Filigran-Floors
from 2007

WATCH VIDEO

Scope of delivery:
32 pallets length 7.9 m, width 3.0 m
Shuttering profiles with automatic clamping system
1 Vario and vibratory compaction system
1 concrete spreader 2 m3
1 multi-function crane, lifting capacity 250 kN
2 stacking racks complete with roller wheels
1 cleaning plotter
1 tilting device at demoulding station
1 turning traverse for turning in the double wall
Control cabinets and control system

Doppelwand Produktionsanlage

Twin-Wall production carousel

Request for more Information: please use this form Continue reading

AAC Plant A20382

Autoclaved Aerated Concrete Plant

FOR SALE
is a complete Autoclaved Aerated Concrete (AAC) Plant, which will be sold with all KNOW HOW from an experienced producer of AAC together with all TRAINING possibilities demanded by the buyer.

The plant is in good condition and well maintained. It is currently not running but is full operative and it could be started to be shown in full operation in Italy.

Output and Specs:
Output with handling cuts and 10 Autoclaves is 540 cm3/day
Output without handling cuts and 12 Autoclaves is 900 cm3/day
Green Loaf Size: 3300mm x 1300mm x 700mm

Porenbeton AAC

AAC Plant

Request for more Information: please use this form Continue reading

Lattice Girder Welding Machine EVG-FIL GH300V M21405

EVG-FIL Lattice girder welding line with variable feed 190 – 210mm

WATCH VIDEO

Type: FILZMOSER GH300V
Lattice girder height adjustable between 70 – 300mm
Adjustable stroke (feed) between 190 and 210mm,
Wires: 5-14mm,
Welding transformers 250KVA
1 pc automatic girder run-off and stacking system, 12m
Remarks: machine is in full operation.
Can be inspected during daily production
Condition: Very well maintained

 

M21405-FIL-GH300V

M21405-FIL-GH300V

Request for more Information: please use this form Continue reading

Precast Mobile Access Aid NUSPL M21400

Mobile Access Aid

for a precast tilting and lifting station.
The electrically movable access aid (ladder) runs along a rail fixed to the floor.
This allows quick access to the upper end of the elements and safe work at height.
E.g. attaching to the crane, and no longer need to carry ladders for a walk.
The speed of the longitudinal movement is infinitely variable.
Installation usually along a tilt table.

Mobile Aufstiegshilfe

Mobile access aid NUSPL

Request for more Information: please use this form Continue reading

Production of terrazzo tiles (polished concrete tiles) M21402

Complete plant for terrazzo tiles

with 3 hermetic presses
mould sizes: 40×40, 40×60, thickness 4 and 5cm
consists of:
1) Press: Longinotti Meccanica type K607/s
2) Press: Longinotti Meccanica type K256/E
3) Press: OCEM type OPA/650
4) Calibration: Breton make
5) Grinding line: Breton make
6) Automatic edging/bevelling machine: Ernst Bauer u. Sohn GmbH
7) Shot peening machine: Konrad Pump type 20-G-600/2
8) Packing: Ernst Bauer u. Sohn GmbH

Produktion Terrazzoplatten

Production of terrazzo tiles M21402

Request for more Information: please use this form Continue reading

Hermetic Slab Press HENKE Silenta 1000to M21401

Hermetic Slab Press

Production plant for the manufacture of double-layer pavers, concrete slabs, exposed aggregate concrete slabs, slabs with coloured concrete.
Designed for a daily output of 800m2 in 2 shifts.

Main components:
– Hermetik press HENKE Silenta 1000to
– MASA hydraulics
– Moulds: 2x 40x40x4,2cm, 60x60x4,2cm, 50x50x4,2cm
– Curing storage
– Transport systems
– Packaging plant
– 4 raw material silos for the face concrete mixing plant
– 2 cement silos 50to
– 2 admixture dosing systems

Hermetic Plattenpresse HENKE Silenta 1000to

Hermetic slab press HENKE Silenta 1000to

Request for more Information: please use this form Continue reading

Reinforcement Centre MFA EVG-FIL RA-X A20358

Rotorstraightener FILZMOSER-EVG RA-X with Reinforcement Robot – FOR SALE

Consisting of:
– RA-X6 with 5 wire diameters 6, 8, 10, 12 und 14mm and bending functions on both ends for 45° and 90° bending ups. Brand: EVG-FILZMOSER
– Removal magazine wire bars for the robot, max. length 10m
– Removal magazine lattice girders for the robot
– REXROTH-HAUSER ROBOT for the pick and place of the reinforcement with 8 moving axis,
Range distance in X-axis: 14m and in Y-axis: 8m

Rotorstraightener FILZMOSER-EVG RA-X A20358

Reinforcementcentre with ROBOT MFA EVG-FIL RA-X A20358

Request for more Information: please use this form Continue reading

MEP Preform Cage Assembler A20388

MEP PREFORM C+P

Year 2005
Excellent condition, refurbished and revised
Dimensions: 15,000 x 4,000 mm
Reinforcing cage dimension: Minimum 150 x 150 mm, maximum 1000 x 1000 x 8000 mmm
Stirrups diameter: 4-16 mm
Longitudinal wire: 4 to 6 mm
Minimum/Maximum pitch: 50-500 mm
Peak power absorbed: 35 kVA
Normal consumption: 5,5 kVA
Includes: 3 wire pay-offs

MEP Preform Korbschweissmaschine

MEP Preform Cage Assembler

Request for more Information: please use this form Continue reading

Concrete Pipe Production SBM A20389

Fully equipped concrete pipe plant

Full equipment for the production of concrete pipes and reinforced concrete pipes, manhole rings and cones.
Manufactured by SBM/ Austria 2007
-production of big pipes Height=2500mm, External diameter – max. 3,000 mm
production of concrete and reinforced concrete rings and cones for manholes
-complete sets of moulds for concrete pipes, manhole rings and cones
Condition: Very good, almost not used

 

Betonrohrfertigungsanlage

Concrete Pipe Production

Request for more Information: please use this form Continue reading

Beam Mould SOMMER 30M A20385

BEAM Mould  FOR SALE

Binder formwork, girder formwork, box girder formwork, bridge girder formwork
Length 30m
Adjustment via mechanical spindle
– 38 pieces vibrators with remote control, including converter and control
Was in use in 3 variants:
-Prestressed, 1 x with wire strand
-Prestressed, with wire strand and cable
-loosely reinforced
-Component height up to 1,80m
-Wing length: 2 x 1,20m
-Web width: 1,90m

BALKENSCHALUNG 30M

BEAM MOULD 30M

Request for more Information: please use this form Continue reading

Garage Mould 2014

Garage Mould 2014 FOR SALE

FOR SALE
a used garage mould for the production of prefabricated concrete garages or space cells
Year of construction 2014

ADVANTAGES
Completely hydraulically adjustable garage mould.
Wide range of adjustment options
The following inner dimensions can be adjusted continuously:
width from 2,5m to 4m
length from 6m to 9,8m
Height from 2m to 3m


Garagenschalung 2014

Garage Mould 2014

Request for more Information: please use this form Continue reading

EVG Polybend Stirrup Bender 16mm A20380

EVG Polybend for SALE

A used EVG Stirrup bender, type POLYBEND PBN-16-C,  used for bending stirrups from coil or produce straight bars from coil.
Wire on coils can be used from 6mm up to 16mm.
Catalog of stirrup bending shapes stored in computer.
– 2 wire pay-offs
– Barcode Scanner
– 4 bending mandrels

EVG Polybend PNB-16-C

EVG Polybend PNB-16-C

Request for more Information: please use this form Continue reading

Stair Formwork U-Shaped A20378

2 Sets of Stair Formwork U-shaped for Sale, each left and right:
Condition: Very good
First Set, left and right formwork, step height 17.9cm
Second Set, left and right formwork, step height 18.33cm
Each side of the staircase has smooth face concrete, except the cast-in side.
Basic formwork for 19 steps. Running width 1,0m Gradient: 17.9/18.33cm Step: 26cm

The Stair Formwork U-shaped is mounted on a base frame. The step plates are made of 6mm folded sheet metal. The soffit is curved and stiffened from 4mm sheet metal.
The side shuttering is provided with screws, including adhesive seal and triangular strip for the soffit.
Casting with flowing concrete is done from above. ( = front side of the stairs).

Treppenschalung U-förmig

Staircase Formwork U-shaped

Request for more Information: please use this form Continue reading

Pile Cage Welding Machine ZUEBLIN A20375

Pile Cage Welder

Controlled by only one person.
Output: max. 4m per minute, but only ever run it at 2m per minute.
8 Rebar pay-off stations, with straighteners

The 5mm welded helical can be programmed to vary the leg frequency to provide closer centres at the pile ends and then transitioning to wider centres in the middle. There is a cutting station that moves automatically at the same speed as the cage and an automatic off load station that handles cages up to 15m long.

Pfahlkorb-Schweissmaschine

Pile Cage Welding Machine

Request for more Information: please use this form Continue reading

Shuttering Robot for Double-Wall Production WECKENMANN A20371

CLICK ON VIDEO

– Shuttering robot for Double-walls and Slabs
– Travel: X-axis 12.50m, Y-axis 5.20m
– Quadruple gripper for simultaneous moving of 4 magnets, and 1 shuttering profile
– Shuttering magazine
– Autom. formwork transport
– Autom. formwork cleaning
– Magnet transport and magnet cleaning
– 700 pcs. Shuttering profiles
– 800 pcs. MLR 5750-R Magnets
– WECKENMANN MRP for Cleaning, Plotting and placing transverse formwork

 

Request for more Information: please use this form Continue reading

Double-Wall Carousel A20355 – 500m2 per day

Double-Wall Carousel A20355 – 500m2 per day

Purpose of Use:

Production of Double Walls with Lattice girders (Truss girders), thickness up to 50cm,
can be used for solid slabs until thickness of 20cm

Advantage: low transport weight, second stage concreting will be done finally on site !

Output: Typical 450-500 m2 per shift

Moving Casting Pallets:

Dimension: Width 3.00m by Length 8.30m, 44 pieces

Pallets are guided in the production process via rails and drive rollers.

Double-Wall Carousel A20355

Double-Wall Carousel A20355

Request for more Information: please use this form Continue reading

Wire cage welding machine A15079

Round wire cages with sockets  – FOR SALE

Cage diameter 320-1600mm for precast concrete pipes
with sockets
Brand: HK-Technik
Production process: continuously
Length of cage: on demand
Line wire diameter: 6mm
Winding wire diameter: 5-8mm
Number of line wires: 12pcs
Rise of winding wire: 30-150mm

 

Wire cage welding machine

Wire cage welding machine

Request for more Information: please use this form Continue reading

MEP Wire Girder Welding Line MTM400 A17164

LATTICE GIRDER PRODUCTION

Output max.: 33 m/min
Lattice girder height: 80-300 mm (easily variable; precise motorized vertical regulation)
L.G. base (internal size) : 70-100 mm
Advance step:   400 mm
Lattice girder length: 2000-12000 mm (multiples of 100 mm)

DIAMETER OF THE WIRE:
Longitudinal wire Ø: 5-12 mm
Continuous stirrup (zigzag) Ø: 3.5-6 mm
(fy = 650 N/mm2 – ft = 650 N/mm2)

2009: Comprehensive update of the entire electrics/electronics
2014: Comprehensive update of the entire mechanic systems, repainting. Now it looks as if it was new!

Wire Girder Welding Line

Wire Girder Welding Line

Request for more Information: please use this form Continue reading

Lean Production Concepts for your Precast Plant

Precast-plants, machines, precastplants

PREQAST offers complete solutions of Precast factories and single production machines for Precast products. PREQAST has the solution, whether you are adapting an existing production line or invest in a Start-up Precast plant. PREQAST can offer you used or new Machinery and Precast plant systems and has the ability to design, engineer and install complete precast production plants.

The newest development is the „Lean Precast Carousel“. A low cost solution, which can be extended in further steps.

by Franz Filzmoser

 

Schlanke Fertigung von Betonfertigteilen

Lean-Precast-Carousel

Request for more Information: please use this form Continue reading

Wall-Elements Plant for lightweight concrete panels A14053

0Lightweight concrete panels production plant – FOR SALE

For panels, slabs, walls made in LIAPOR, LECA or other light materials to encase or insulate warehouses, distribution centres and industrial buildings with steel frame construction.
Further the equipment can be adapted for the production of standard concrete walls and floors as well.

Pallets Carousel Line, Pallets dimension/max. element size: 2.00 x 12.00 m

Complete Concrete Mixing plant with cement silos, aggregates silos, conveyor belts, bucket elevator etc. is included.

Precast concrete panels are delivered to site made to measure. Manufactured in controlled environment factory conditions, the panels are quickly erected to provide high quality precast concrete walls.

Wall-Elements Plant

Wall-Elements Plant

Request for more Information: please use this form Continue reading

How much for my Precast Plant ?

How much can I get for my precast production plant or equipment?

To find out the worth of your production machine/plant send some basic information like:

  • Brand/Type of the machine/ equipment/ plant
  • Year/ Capacity
  • Condition and add. info i.e. photos

Send us an e-mail to moc.s1620821010tnalp1620821010tsace1620821010rp@of1620821010ni1620821010 or use the Request Form below:

Wieviel bekomme ich für meine gebrauchte Maschine?

How much can I get for my used machine ?

Request for more Information: please use this form Continue reading

Rotor-Rollers for EVG–FILZMOSER RA-XE Straightening machines

1801Hyperbolic formed rollers

are the heartpiece of a EVG and FILZMOSER RA-XE combined straightening and bending machine in the precast concrete industry. These machines are produced since beginning of the 1990s and well known for smooth results of the treated straightened wires.

PREQAST has increased its portfolio of rollers and is able to deliver hyperbolic rollers for all RA-X
and RA-XE machines at very reasonable prices:

  • RA-X Hydraulic Straightener until 1996
  • RA-XE Electric Straightener up to 2009
  • RA-XE Electric Straightener after 2010

You can get almost all types of rollers from stock or within 2-3 weeks, just ask whether your type is on stock.

or contact moc.t1620821010saqer1620821010p@ofn1620821010i1620821010

Franz Filzmoser

EVG/FILZMOSER RA-XE-ROLLE-GMS-1000

EVG/FILZMOSER RA-XE-Roller

Request for more Information: please use this form Continue reading

Production system PRINZING ATLAS 300/300 A9316 ** SOLD **

Flexible production system PRINZING ATLAS

ready for immediate use
For the production of:
Septic tanks, pipes, tanks, rectangular shafts, manhole bases and products for road construction
Processed Material: stiff concrete

Manufacturing range: diameters 150 – 3500mm
Space requirement of basic machine:
approx. 13 500 x 6.000mm
Equipment:
Reversing traverse
Complete molds incl. sleeves
for production of concrete pools
1500/1500 up to 2700/2500

Produktionssystem PRINZING ATLAS 300/300 A9316

Production System PRINZING ATLAS 300/300 A9316

Request for more Information: please use this form Continue reading

Floor slabs pallets carousel AVERMANN A20354 ** SOLD **

220Floor slabs pallets carousel AVERMANN – FOR SALE

Purpose of Use:

Production of Floor Slabs with Lattice girders (Truss girders) also known as Filigree Slabs (the company FILIGRAN is producer of lattice girders) or Semi finished floors,

Advantage: low transport weight, second stage concreting will be done finally on site !

Output: Typical 1000 m2 (One Thousand Squaremeter) per shift by employing 8 workers

Pallets Cycle Time up to 6 minutes

Moving Casting Pallets:

Dimension: Width 2.20m by Length 9.30m, formwork on both sides of the pallets with 45° Chamfer, pallets are guided in the production process via rails and drive rollers

Floor slabs pallets carousel AVERMANN, A20354

Floor slabs pallets carousel AVERMANN, A20354

Request for more Information: please use this form Continue reading

Floor slabs pallets carousel A20356 ** SOLD **

Floor slabs pallets carousel A20356 – FOR SALE

Purpose of Use: Production of Floor Slabs with Lattice girders (Truss girders, Filigran Slabs)

also known as Filigree Slabs (the company FILIGRAN is producer of lattice girders) or semi finished floors,

Advantage: low transport weight, second stage concreting will be done finally on site !

Output: Typical 800 m2 per shift

Moving Casting Pallets:

Dimension: Width 2.50m by Length 17.50m, formwork on both sides of the pallets with 45° Chamfer, pallets are guided in the production process via ficed rollers and drive rollers

Floor slabs pallets carousel BUMAT A20356

Floor slabs pallets carousel BUMAT A20356

Request for more Information: please use this form Continue reading

Manhole Manufacturing Plant COLLE A20365 ** SOLD **

Used Manhole Manufacturing Plant COLLE Vibromatic 100/150 H150

Year of construction: 1991
Good, immediately operational state!
Production range: DN 1000 to DN 1500
Max. height: 1500 mm

Incl. discharge, cart brand REKERS
– Machinery frame
– Central vibrator
– Hydraulic aggregate
– Controller
– Header press
– Charging unit
– Base ring inserter
– Discharge-cart

Pallets circle, brand REKERS
Full automated crane manipulator, brand REKERS
Moulds DN 1000
Moulds DN 1500

Manhole Manufacturing Plant COLLE A20365

Manhole Manufacturing Plant COLLE A20365

Request for more Information: please use this form Continue reading

Precast Concrete Batching Plant LIEBHERR M21404 ** SOLD **

Ring pan intensive mixer RIM 1.0-M

WATCH VIDEO

Nominal capacity 1m3, filling quantity 1500L
– with row batcher 4 x 35 cbm
– elevator from the weigh belt into the mixer
– Binding agent storage 2 x 60 to
– Dosing equipment for aggregates, binder and water
– Weighing equipment
– Dosing control SteKa incl. switch cabinet and E-installation

 

Betonmischer

Batching Plant

Request for more Information: please use this form Continue reading

EVG Polybend PBC 16mm A9321 ** SOLD **

EVG Stirrup Bender

Stirrup bender to produce stirrups and bars.

Year: 2007

Automatic setting of wire guides and straighteners.
Condition: very good, machine cleaned and all straightening and driving rollers changed to new ones!

Wire diameter ranges for single wire: 6,0 – 16,0 mm
Wire diameter ranges for double wire: 6,0 – 12,0 mm

EVG Polybend PBC 16mm

EVG Polybend PBC 16mm A9321

Request for more Information: please use this form Continue reading

Column Mould 52m SCHWINGHAMMER A20392 ** SOLD **

Column and Beam Mould

Manufacturer: SCHWINGHAMMER,
Year of manufacture: 1995
Formwork elements, consisting of:
– 4 pieces each 10 meters long, each with 5 pieces 250V Bosch external vibrators
– 1 piece with 12 meters length and 6 pieces 250V Bosch external vibrator
The basic width of each formwork section is 2.42 metres.
Each formwork part has a height of 1.58 metres.
Condition: Good

 

Stützenschalung 52m

Column Mould 52m

Request for more Information: please use this form Continue reading

Concrete Mixing Plant A9343 ** SOLD **

Mixing Plant

Concrete Mixing Plant with 4 Silos.
Conveyors, Scalings, Control complete.
Fully operational.

Including:
-truck feeding silo
-Conveyor belt 28m/650mm
-Reversible conveyor belt 5,5m/800mm
-2 material silos each 96m3
-2 dosing belts 2,80m/500mm
-1 gravel weighing scale 2000kg
-Conveyor belt 8m/800mm
-1 TEKA Mixer 1,125Liter, 30KW

Request for more Information: please use this form Continue reading

EVG FIL RA-XE 16/6 Straightening and Bending Line 16mm A20381 ** SOLD **

RA-XE 16/6 Straightening and Bending

FOR SALE
Rotor straightening and cutting machine EVG-FILZMOSER RA-XE 16/6 with double bending
Year of construction 1999, with 2 movable bending heads at the outfeed table
6 wire tracks for wire diameter: 6-16mm
Production direction from left to right
In very good condition, regularly serviced by EVG-FILZMOSER

Straightening Line 16mm

EVG FIL RA-XE 16/6

Request for more Information: please use this form Continue reading

Tilting Table AVERMANN 15m X 4m A20386 ** SOLD **

Tilting Table FOR SALE

Year of construction = 2010, Manufacturer: Avermann Maschinenfabrik GmbH, Germany, total weight = 15.2 To

Consists of:
– 1 Hydraulic large surface table 15.0m x 4.0m (7.5 kN/m2, payload max. 40 To)
– 1 thermal oil heating register for tilting table
– 10 spanning beams
– 13 Brackets for vibrators

Kipptisch A20386

Tilting Table 15x4m A20386

Request for more Information: please use this form Continue reading

Concrete Tiles Production Plant SCHINDLER A9346 ** SOLD **

Fully Automatic Production Plant for concrete tiles

Year 2010, Brand: Schindler
The line can produce grinded, polished, washed and shotblasted tiles.
The batching plant is designed to feed two presses simultaneously, if needed.
Electric substation and air-compressors are included as well as filter press-pump.
Factory has stopped production since 2018.

Automatic Hermetic-Turntablepress TOP 9000/600T OCEM and further 28 positions, which are described more precise in a customised offer.

Beton Gehwegplattenfertigung SCHINDLER A9346

Concrete tile production plant SCHINDLER A9346

Request for more Information: please use this form Continue reading

Custom Made Reinforcing Mesh Plant EVG-FIL HFBE A9339 ** SOLD **

TOP ADVANCED TECHNOLOGY

for the production of mesh sheets and reinforcing panels. Top condition
Fully automatic, Year of manufacture: 2010
No changeover time needed for production of different sheet shapes
Including automatic bending stations for cross and line wire overhangs
Diameter of longitudinal bars of a mesh from coil (or rod): 6-16 mm (18-20 mm)
Diameter of transverse rods from coils: 6-16 mm
Length of the longitudinal bars of the mesh: 300-12000 mm
Length of transverse rods: 300-4000 mm
The largest element 4000 x 12000 mm
The smallest element 500 x 800 mm
The maximum weight of welded panels (meshes) is 700 kg
The maximum weight of a unit surface of welded elements is 30 kg/m2

EVG HFBE BFT Bewehrungsmatten

EVG HFBE Custom made Mesh

Request for more Information: please use this form Continue reading