Brand: SOMMER
Year 2007, less used
Casting area: 7215 x 3140mm
Max. element size: 7100 x 3000mm
Max. Load: 11tons
Double-Wall Thickness: 180-400mm
Steel sheet 8mm, even face
Used for face concrete
Including:
E-Vibration
Converter
Control
Turn-Over Tables for Double-Wall production
To find out the worth of your production machine/plant send some basic information like:
Send us an e-mail to moc.s1563447285tnalp1563447285tsace1563447285rp@of1563447285ni1563447285 or use the Request Form below:
How much can I get for my used machine ?
for Double-Wall production
Manufacturer: SCHWINGHAMMER
Steel covering even for faced concrete
Dimensions per table: 12,50 x 3,50m
Wall thicknesses: 20 – 40 cm
Incl. 2 x 8 pieces vibrators
Incl. hydraulic cylinders
Hydraulic 7.5 kW, 150 l. Tank, 200 bar
Heating pipes for water are installed
Technical specifications:
Usable length: 12.5 m
Usable width: 3.50 m
Height: approx. 1 m
Payload tilting table 750 kg / sqm
Payload Turn-Over Table 400 kg / sqm from 80 ° to 180 °
Tilt angle: approx. 80 ° or 180 °
Operating pressure: 180 bar
Electric connection hydraulics: 15 kW
Net weight: tilting table 11tons, folding table 13tons
Turn-Over Table
1 pc used hydraulic tilting table
Make: AVERMANN
Steel sheet – some wear
– Fixing plates for vibrators (no vibrator available)
– 2 hydraulic cylinders
Avermann TiltingTable
Factory NUSPL
Dimensions: approx. 12.50 x 4.50m
Steel sheet – for exposed concrete production
side form fixed
Incl. Hydraulic Station
Incl. 11 pcs. external vibrator
Hydraulic tilting table
Factory AVERMANN
Dimensions: approx. 16 x 4m
Steel sheet – for exposed concrete production
side form fixed
Incl. Hydraulic Station
Incl. 12 pcs. external vibrator
Hydraulic tilting table
Outer width 3.10m
5 Hydrocylinders including Hydraulic-station
On both sides hydraulically movable side forms. These side forms limit the width to 2.72m. If the side forms are removed 3m are available for casting.
Weight: 22tons
Manufacturer: SKAKO Year 1995
Not used very much. The factory was closed for 15 years.
2pcs are available
Tilting table 22.50m x 3.00m
6 pcs out of a PROGRESS circulation line
Price per piece
8mm Steel sheet
Casting area Width 3.63m by 13m
Casting Tables movable
1 pc used hydraulic tilting table
Make: AVERMANN
Steel sheet – some wear
– Fixing plates for vibrators (no vibrator available)
– 2 hydraulic cylinders
Avermann Tilting Table
Casting tables, moveable 3.30 x 13m (3pcs)
Manufacturer: EBAWE
Length: 13m, Width 3.55m
Useable width: 3.30m
Load max: 500kg/m2
Sheet even
Immediately available
Casting tables 3.30 x 13m
Sheet of 10mm Steel,
3 support legs with cylinders,
Load capacity up to 750 kg/m2
1 Height-adjustable side form 50 – 400 mm
Electric Vibration system consisting of 8 electric vibrators
Power pack for vibrators with frequency converter
Hydraulic tilting table
dimensions: 3.50 x 10m
Steel surface plan and even!
Incl. 5 pcs. vibrators
Incl. 2 pcs. hydraulic cylinders
Incl. 1 pcs. Converter 42 V
Hydraulic Tilting table
with hydr. stamps and shaker
Steel sheet
For face concrete, the surface rust has to be put away
dimension: 12 x 3.50 m
one-sided sideform 28 cm height
Hydraulic Tilting tables
Casting area per table: 11.30 x 3.40 m
Steel sheet with little rust
including 2 hydraulic cylinders each
Fixing angles for vibrators are installed
Tilting Tables
dimensions: 4.10 x 10.50m
Steel surface plan and even!
Incl. 6 pcs. vibrators
Incl. 2 pcs. hydraulic cylinders
Incl. 1 pcs. converter 42 V
weight: about 10.3 t
Hydraulic Tilting table
Used, for Precast slabs, walls, elements
Brand: AVERMANN
Max Size of precast elements 11m x 3.5m
Wall thickness: 100-500mm, each 10mm adjustable
Turn-over device
AVERMANN Casting Beds,
Forms & Equipment
Whether stationary or flexible production, formworks or highly automated circulation systems, we have the solution for your needs.
AVERMANN Tilting table
Tilting Tables SCHWINGHAMMER
2pcs, Dimension finished element: 12m x 3.80m
Folding pallets ELEMATIC
2pcs for the production of Double Walls
Dimension finished element: 12.50m x 3.80m
Filigree Floor Slab Tables 5pcs SCHWINGHAMMER
Dimension finished element: 12.00m x 2.50m
Complete Set of Shutters with all the Magnets for 9 tables
All tables are equipped with thermo-oil pipe register
Stationary Production
max. panel length 7.10m x Width 3.10m
Max. Slab Weight: 8 tons
Year 2015
Turn-Over for panels
Casting width: 3.00m
Casting length: 7.00m
Included:
7pcs vibrators
2 Hydraulic cylinders plus station
Converter and control
Hydraul. Tilting Table 7.0m x 3.00m
l-shaped-retaining-wall-molds-howal,
Year: 2011
11 pc 55/99 und 1 pc 55/49
11 pc 80/99 und 1 pc 80/49
11 pc 105/99 und 1 pc 105/49
22 pc 130/99 und 2 pc 130/49
22 pc 155/99 und 2 pc 155/49
L-shaped-retaining-wall-molds-howal
Finished product dimension: 12 x 4m
Together with the tilting table come:
– each table with a Control unit
– each table 9pcs Vibrators from BOSCH
– each table 2pcs Hydraulic Cylinders
with one common Hydraulic Station
Tilting Table AVERMANN 8 x 4m
Finished product dimension: 8 x 4.18m
Together with the tilting table come:
– Control unit
– 7pcs Vibrators from BOSCH
– 2pcs Hydraulic Cylinders with Hydraulic Station
Tilting Table 8×4,2
Casting Table with Vibration 3.50m x 7.00m
Heavy construction
Steel sheet cover
4 WACKER Vibrators
Expandable to a Tilting Table
Casting Table with Vibration
Year 2007
Casting width: 3.90m
Casting length: 8.70m
Casting height: 20cm
Included:
Heating pipes installation
Hydraulic cylinders and hydraulic station
Tilting Table 8.70m x 3.90m
– Table lengths is 168.0m to produce panels 2.50m width
– Table is modulated in 12.0m long elements (for transport reasons)
– There are a lot of shutters to produce panels 20cm, 16cm, 12cm thickness
– Other accessories to produce panels with windows, doors…
HYDRAULIC STRIPPING WITH LATERAL OPENING OF THE LONGITUDINAL FORMWORK
– The longitudinal laterals open by hydraulic force
Precast Tables for Wall and Floor Panels Production
– Casting Table length is 48.0m to produce panels 3.00m width.
– Integrated Vibration system
– underfloor heating system
– Line is modulated in 12.0m long elements
– There are a lot of shutters to produce panels 20cm, 16cm, 12cm thickness
Long Precast Casting Table
Casting Table 36.00m x 2.20m
WECKENMANN Casting Table 26.00m x 2.50m
WECKENMANN Casting Table 16.00m x 2.70m
NEWS: 16m Casting table is already sold!
Casting-tables-Precastplants.com
Year 1988
1 Used Carousel line for the Wall Production
12 tilting tables 7.00 x 3.50m
1 lowering/ lifting station for the tables
1 Concreting station
Carousel line for the Wall Production
from a wall production line
Manufactured by AVERMANN
Year: 2004
Finished product: max. 7.00 x 3.00m
Sideform: 8cm
Steel pallets 7x3m
Precast Concrete Pallets for Floor Slabs Production, 43pcs
Brand: NUSPL
Precast element size max: 13.50 x 2.50m
Pallet size 13.50 x 2.72m
Good condition
circulation pallets
Dimension/Casting Area: 15.50 x 2.40m
Could be used for mobile production (as a moving pallet) or as fixed tables
Used to produce faced concrete floor slabs
Includes complete transport/carousel equipment from VOLLERT
consisting of:
1 pc VOLLERT/NETTER compacting unit with 4 vibrators
2 pc lateral moving carts
55 pcs single transport rolls, height 500mm
21 pcs drive rolls, including control units
40 pcs terminal switches
including control, Alarm and Security equipment
Casting Tables for Floor Slabs
20pcs
Robust design
Size: 3 by 7m
Steel surface:
Thickness 8mm, flat and level,
16pcs cross beams welded
Condition: barely used, good condition
Carousel pallets
for turning the slabs of a Double Wall production
Manufacturer: VOLLERT
Year: 1996
Equipped with 44pcs Vacuum suction plates,
which are adjustable longitudinally and transversely.
Autonomous unit, doesn’t need a crane for the turning process. Is used for a pallet size of 13m x 3.30m
Capacity: Turns the dead weight of the pallet (6745kg) plus the precast concrete slabs.
Turning table VOLLERT
6 moulds in one formwork, 3pcs
7 moulds in one formwork, 1pc
10 moulds in one formwork, 1pc
Width 500mm, Stone-height 1500mm, Foot-height 1000 (900) mm,
Thickness: 100mm
Angle elements moulds
Casting table No. 1, No. 2 and No. 3:
each 75m x 2.50m
Casting table No. 4: 63m x 2.50m
Plotter 2004, Concrete distributor,
rebuilt in 2014, Cleaning and oiling station, all from WECKENMANN
Casting-tables
Year: 2000, Steel covered, tables should be grinded
Location: Precaster in Germany,
Table 4: 8.00 x 3.70m
Table 5: 9.00 x 3.80m
Table 6: 8.00 x 3.63m
Table 7: 8.30 x 5.00m
Table 10: 12.00 x 4.90m
Precast Tilting Table
Angle element formwork No.1
Tandem version,
length:12.60m, width: 2.60m, height: 1,75m
Weight: 16tons
Number of forms: 2 x 13pcs
Angle element formwork No.2
Length: 5.90m, width: 2.40m, height: 2.00m
Weight: 7.9tons
Number of forms: 6pcs
Angle element formwork No.3
Length: 1.62m, width: 2.64m, height: 1.85m
Weight: 2.7tons
Number of forms: 2pcs
Angle element formwork
Dimension table 1: 8.50m x 3.50m
Dimension table 2: 7.50m x 3.70m
Manufacturer: GÄRTNER
1 shutter on the long side
10 pcs shaker WACKER
and 2 pcs hydraulic cylinders
Tilting-tables
Brand: AVERMANN
– 2 sides with fixed shutters
– 2 sides with moveable shutters
– including a hydraulic station
– 2 hydraulic cylinders
– Converter
– 9 pcs shakers BOSCH
Tilting table
Brand: SCHWINGHAMMER
Year: 1999
Condition: Very good, for instant use!
Finished precast products: up to 10m x 3.80m
Steel covered: Surface flat and smooth
Equipped with 2 hydraulic cylinders and
8pcs BOSCH shakers
Tilting table
Condition: Very good, for instant use!
Dimension: 9.00m x 4.10m
Steel covered: 8mm, Surface flat and smooth
for faced concrete
Max. Load: 750kg/m2
Equipped with hydraulic cylinders and
7pcs WACKER shakers
Tilting table AVERMANN
Hydraulic driven tilting tabel 4.50 x 15m
Made of steel with wooden base plate
Upstand on one side 250mm
Tilting move by 2 hydraulic cylinders
Includes:
11 pcs KNAUER shaker. 1000W, 1.9A
Hydraulic station and
2 pcs hydraulic cylinders
Precast Tilting table
Staircases with a width up to 2.26 m and 18 steps can be produced in fitting position. Length of landings up to 2.00 m. Owing to steel covering smooth underside.
By laying down the ramp the formwork can be used as a production table.
Staircase formwork ramp
Manufacturer: SOMMER
Pallets width: 3.20m, Length: 10.50m
Reconditioned in 2011
Condition of the pallets: Very good
Components:
1. 16 pcs Steel pallets 10.50m x 3.20m
Surface grinded, plan, clean, ideal for Fair-Faced Concrete
2. Vibrating station for pallets
3. 2 tracks for pallets transversal movement
4. 240 pcs Rollerbrackets and drives for pallets movement
5. Concrete distributor
6. Stationary Cleaning station for pallets
7. Plotting/Oiling station
8. Various formwork and magnets
9. Telemechanik Schneider Control and Visualisation
10. Electro cabinet and cables
Precast-Pallets-Carousel
2 x Casting tables 65m and 35m
finished slab width 2.25m
CLEANING, PLOTTING, OILING device, made by WECKENMANN
CONCRETE SPREADER, made by WECKENMANN
SLABS LIFTING OFF device, made by WECKENMANN
Both casting tables include:
– sled shaker and thermo-oil heating pipes installation
– electric control
– Converter
– transverse form profiles
Floor-slabs-prod-on-casting-table
3 pcs
Length: 80m
Casting width: 2,40m
Manufacturer: EBAWE and WECKENMANN
Upstand 70mm with chamfer
Steelsheet quality made for fair-faced concrete
Includes:
Thermal-oil pipe installation
Complete table insulation
NETTER vibrators
Concrete Casting Table
If you have a production equipment or a machine for Sale
please contact us: office(at)gms-global.at
Thank you.
2pcs Tilting table 8.60m x 4.30m
included:
each table with 2 hydraulic cylinders
no vibrator included
hydraulic station
electr.control
Steel table, should be grinded
Precast tilting table
included:
used steel frame with 2 hydraulic cylinders
used hydraulic station
electr.control
NEW: Steel surface, made of steel quality S 235
double rolled steel
Polished steel surface
NEW Vibrators, 10 pieces, made by NETTER
Tilting table