Stirrup Bender Stema-Pedax Twinmaster 12S A9312

Automatic Stirrup Bender

Model: Twinmaster 12S
Condition: Revised. Fully Operational
Extras: Two Pay-Offs and Two Coil Holders
Other: Bar Code Scanner. A third pay-off can be delivered
Technical specifications:
Wire diameter Single strand: Ø 5-12,7 mm and double strand:      Ø 5-10 mm
Rate of feed, max. 110 m/min
Bending speed, max. 1500°/sec
Operating voltage 3 x 400/ V/50 Hz

Bügelautomat Stema-Pedax Twinmaster 12S A9312

Stirrup Bender Stema-Pedax Twinmaster 12S A9312

Request for more Information: please use this form Continue reading

Rebar Cut Line MEP-OMES A9310

Rebar Cut Line MEP-OMES

-Pulling,Measuring and Cutting Unit Mod. “CUT LINE”
-max diameter 40mm
-mobile stock for bars with 7 racks for the storage of the bundles of bars
-the maximum length of the bars that can be processed is 14m
-Pulling Unit
-Measuring Unit
-Cutting Unit: following capacitiy
1bar-dia40mm, 2bars-dia.32mm, 3bars-dia.26mm, 4bars-dia.20mm,

-Measuring and Evacuating line
-Distributing Conveyor
-Collecting Unit Rack and more

Stangenschneidezentrum MEP-OMES A9310

Rebar Cut Line MEP-OMES A9310

Request for more Information: please use this form Continue reading

Stirrup Bender MEP Minisyntax A9309

MEP MiniSyntax, 2001

Manufacturer: MEP SpA
Year: 2001
Condition: Refurbished
Auxiliary Mobile Straightening Device
Other: The machine is fully operative
-Single wire processing: Diameter Φ6mm-Φ16mm
-Double wire processing: diameter Φ6mm-Φ12mm
-4 pcs pay-offs and coil holders,
-automatic diameter change
-safety fences, 12m collection bench(in 3 parts)
-all pins and mandrels (for all diameters).

Bügelautomat MEP Minisyntax A9309

Stirrup Bender MEP Minisyntax A9309

Request for more Information: please use this form Continue reading

Automatic Reinforcement Center for Precast Floor Slabs A9304

Steel Robot for Pick and Place A9304

Reinforcement Center for Pallet circulation places Rebars and Lattice girders

This used complete steel processing plant made by PROGRESS
has revolutionized the production of Floor Slabs with FILIGRAN lattice girders.

consisting of a fully automatic wire straightener
Cutting and bending machine, an 8-axis gantry robot and a lattice girder processing station
(Was in use for pallets size 2.51 x 9 m)

Plant components in detail:
1. Full Auto Multi Wire straightening and bending machine
with spacer automatic, cut bar magazine and chain magazine.
Machine type: PROGRESS MSR 16/5 – 2Bk / e SERVO-ASH
– Incl. 2 bending heads (only cranking)
– Wire diameters: 6-14 mm
– Wire run-off length 11 m

2. Lattice girders processing station
PROGRESS GTA 91 / s – LIFT 93
Consisting of a lattice girder storage rack, a lattice girder cutting machine and a lattice girder
buffer and positioning magazine + top bar welding system

3. 7-axis linear robot PROGRESS EPR
For fully automatic laying of the transverse reinforcement, the longitudinal reinforcement and the lattice girders on the pallets
Control System Siemens S5

Stahlbearbeitungsanlage PROGRESS

Steel Robot for Pick and Place

Request for more Information: please use this form Continue reading

Mould for Electrical Substation A9301

Mould for Electrical Substation A9301

Monolithic Mould

Dimension: Length 4m x Width 2.50m x Height 3.20m
(Supportconstruction for cables Height 0.80m)
Wall thickness 10cm
External vibrators
Including Electric
Further Equipment:
1 pc Flat roof formwork
1 pc Gable roof formwork

Trafostation

Mould for Electrical Substation

Request for more Information: please use this form Continue reading

SCHNELL IDEA MDF Cage Assembler A8296

SCHNELL IDEA MDF 12/25 A8296

Year 2004
Condition: Very good (revised and repainted)
Minimum stirrup to work: 150 x 150 mm
Maximum stirrup to work: 1.500 x 1.500 mm
Ø of the stirrup wire: 6-16 mm
Normal Ø of the long. wire: 4 mm
Pulling speed: 45 m/min
Average energy consumption: 8 kWh

Schnell IDEA MDF Korbschweissmaschine

Schnell IDEA MDF cage assembler

Request for more Information: please use this form Continue reading

Cold Rolling Line GCR MTO 760/2 A8283

Cold Rolling Line GCR MTO 760/2

Year of Construction 2009

Consists of:
SVD/2 Coil Pay-off
RD 140/2 Mechanical Descaler
SA-CLR Soap Applicator
MTO 760 Cold Rolling Machine B
OM 1250 Spooler
Wire direction: from left to right
Process material: less carbon steel wire C = 0.10% max.
Input diameter: 16.0 to 5.5mm
Output diameter: 14.0 to 4.0mm, cold rolled ribbed concrete steel
Intake material load: up to 550 Mpa
Max. speed: 11.0 m/sec
Noise level: less than 82 dBA
Total weight approx. 29,800 kg
Total power: 555 kW
Cassettes: Four cassettes (two inbound and two finishing cassettes)

 

Cold Rolling Line GCR MTO

Cold Rolling Line GCR MTO

Request for more Information: please use this form Continue reading

Mesh-Welding Line EVG GE12/102-LTPV A8282

Mesh-Welding Line EVG GE12/102-LTPV

Year of construction 2009

Output: 110 Weldingcycles per minute (equal to 110 Transversal bars per minute)

Max. shape of the produced wire mesh: 2.40m x 7.80m

Long bars and transversal bars are fed by prepared bars

Straightening and Cutting of the bars is done by 2 EVG Cutting lines which work from coil

On demand there is a Cold Rolling Line with 2 blocks available which is suits to the capacity of the mesh welding line.

Mesh-Welding Line

Mesh-Welding Line

Request for more Information: please use this form Continue reading

Floor T-Beam Moulds 12pcs A8281

Floor T-Beam Moulds

Year of construction: 2007 (very little use)
Manufacturer: Macfab
150mm deep, 127mm wide
The set is self stressing 12 beams wide and consists
of 12 number 6.0m beds including the ends with safety barriers

Features:
Self Stressing unit no need for buried anchored ends.
Modular sections means bed lenght can vary.
Superior finish.
Special concrete cutting equipment is not needed.
A budget solution for pre-stressed flooring.
Size of beams give easy access and lifting onsite.

Floor T-Beam Moulds

Floor T-Beam Moulds

Request for more Information: please use this form Continue reading

1 used Twin column mould NUSPL A8279

1 used Twin column mould

Brand: NUSPL type Duplex
Very well-maintained condition!

Total length: 21m
Segment lengths 12m + 9m

Max. Production height: 1.200mm
Max. Production width: both sides 800mm each

Incl. central hydro pump unit
With built-on electrical control

Includes 14 pcs High frequency vibrators, BOSCH

Twin column mould

Twin column mould

Request for more Information: please use this form Continue reading

1 used Column Formwork A8265

1 used Column Formwork

Year of construction 2008
The formwork was barely used!
Support from base: 800 x 40 x 60 cm
Transition to the rejuvenation: L = 20 cm
Rejuvenated part: 500 x 24 x 60 cm
Base: 200 x 290 x 50 cm

Support: One longitudinal side formwork height (60cm) rigidly connected to the ground,
one longitudinal side hinged.
No external vibrators installed, since it was compacted by means of a vibrating bottle.
Weight: 4.5 t

Column Formwork

Column Formwork

Request for more Information: please use this form Continue reading

Precast Hollow Core Floor Production System COOTE A8264

Precast Hollow Core Floor Production System

Complete Dry Cast production system includes:
– Feed Hopper
– Mould
– Mould/Core Carrier
– Pallet Transfer Conveyor
– Mould Spray Unit
– Pallet Handler and much more

Detailed Specification:
CASTING MODULE
• Mould area: 7.0 meters long x 0.600 meters wide
• Product height: 150mm
• Product weight: 1400 kg.(max)

Precast Hollow Core Floor Production System

Precast Hollow Core Floor Production System

Request for more Information: please use this form Continue reading

Used B&R Controls in E-cabinets A8258

Used B&R Controls in E-cabinets

Used B+R Controls, E-Cabinet consist of 3pcs Cabinets with
different modules of B&R Control racks and
Hauser Converters and others
according pictures.
B+R Provit Terminal
Various B+R Controls
Different electronic cards:
NT44, CP70, PP60, PNC3, MARC, EXS2, EXE3, E243, A, PNC8
Hauser Servax Converter

B&R Controls in E-cabinets

B&R Controls in E-cabinets

Request for more Information: please use this form Continue reading

Turn-Over Table 2pcs for Double-Wall production SOMMER A8240

2 pcs used Turn-Over Tables for Double-Wall production

Brand: SOMMER
Year 2007, less used
Casting area: 7215 x 3140mm
Max. element size: 7100 x 3000mm
Max. Load: 11tons
Double-Wall Thickness: 180-400mm
Steel sheet 8mm, even face
Used for face concrete
Including:
E-Vibration
Converter
Control

Turn-Over Tables for Double-Wall production

Turn-Over Tables for Double-Wall production

Request for more Information: please use this form Continue reading

Stirrup Bender SCHNELL Formula 14 A9311 **SOLD**

Automatic Stirrup Bender

Type: Automatic Stirrup Bender
Model: Formula 14 Sapiens
Manufacturer: SCHNELL
Year: 2009
Condition: EXCELLENT FULLY Operational                                Three breaked pay-offs and coil holders
Semi Automatic Diameter Change                                              Single Strand dia: 6-14mm
Double Strand dia: 6-10mm

Bügelautomat SCHNELL Formula 14 A9311

Stirrup Bender SCHNELL Formula 14 A9311

Request for more Information: please use this form Continue reading

Stirrup Bender SCHNELL A9318 **SOLD**

SCHNELL Prima 12R

Stirrup Bender SCHNELL Prima 12R
Year: 2006
working hours: 24290
2 pay-offs
Single strand: 4,2-13 mm
Double strand: 4,2-10 mm
Max bending angle: 180°
Central mandrels: 20-50 mm
Max Pulling speed: 130 m / min
Max Bending speed: 1650° / sec
Average electric power consumtion: 2 kWh

Bügelautomat SCHNELL 12R A9318

Stirrup Bender SCHNELL 12R A9318

Request for more Information: please use this form Continue reading

Straightening machine for cross wire production of floor slabs EVG/FIL RA-XE 10/3 A9308 **SOLD**

Rotor straightening and cutting machine

1 used Rotor straightening and cutting machine
EVG/FIL RA-XE 10/3
Year of construction: 2008
Consists of:
– 3 pay-offs for steel coils 6, 8, 10 mm
– Straightening and cutting machine
– Spacer clip system
– Cross bar placing system
– Without spacer pots and feeding

Richtmaschine zur Querdrahtproduktion EVG/FIL RA-XE 10/3

Straightening machine for cross wire production of floor slabs EVG/FIL RA-XE 10/3 A9308

Request for more Information: please use this form Continue reading

Stirrup Bender MEP Mini Syntax A9303 **SOLD**

Stirrup Bender Mini Syntax A9303

Completely reworked,
6 braked pay-offs,
pulling winch, MEP auto-diameter change, 12m run-off
VERY GOOD condition, year 1999, approx.

Single Strand Processing Wire Diameter Φ6mm-Φ16mm
Double Strand Processing Wire Diameter Φ6mm-Φ12mm
Square Stirrup Dimensions
Minimum with Φ6mm wire – #2wire (optional bending pin) 80mm x 80mm
Maximum if clockwise 1.500mm x 1.500mm
Maximum if counter clockwise 2.000mm x 2.000mm

Bügelbiegemaschine MEP Mini Syntax

Stirrup Bender MEP Mini Syntax

Request for more Information: please use this form Continue reading

Stirrup-Straightening-Bending machine SCHNELL EURA A8298 **SOLD**

Schnell Eura 16/12 Bridge EVO year 2011

Ø6-Ø12 double wire
Ø6-Ø16 single wire
8 pcs pay-offs, brakes
Output 140 m/min
Double bending device
Wire runoff table 12 m
Collecting cart
Automatic wire change
Automatic straightening
Fast Genius straightening system
Bridge Work Platform
Straightening System Service was done in Oct. 2018 by Schnell engineers

Bügel-Richt-Biegemaschine

Stirrup-Straightening-Bending machine

Request for more Information: please use this form Continue reading

MEP PREFORM Cage Assembler A8295 **SOLD**

MEP PREFORM C+P TB1 A8295

Year 2009
Excellent condition, refurbished and revised
Only 3504 hours
Dimensions: 15,000 x 4,000 mm
Reinforcing cage dimension: Minimum 150 x 150 mm, maximum 1000 x 1000 x 8000 mmm
Stirrups diameter: 4-16 mm
Longitudinal wire: 4 to 6 mm
Minimum/Maximum pitch: 50-500 mm
Peak power absorbed: 35 kVA
Normal consumption: 5,5 kVA
Includes: 3 wire pay-offs

MEP Preform Korbschweissmaschine

MEP Preform Cage Assembler

Request for more Information: please use this form Continue reading

Turn-Over Table for Double-Wall production A8290 **SOLD**

1 used Turn-Over Table

for Double-Wall production
Manufacturer: SCHWINGHAMMER
Steel covering even for faced concrete
Dimensions per table: 12,50 x 3,50m
Wall thicknesses: 20 – 40 cm
Incl. 2 x 8 pieces vibrators
Incl. hydraulic cylinders
Hydraulic 7.5 kW, 150 l. Tank, 200 bar
Heating pipes for water are installed

Technical specifications:
Usable length: 12.5 m
Usable width: 3.50 m
Height: approx. 1 m
Payload tilting table 750 kg / sqm
Payload Turn-Over Table 400 kg / sqm from 80 ° to 180 °
Tilt angle: approx. 80 ° or 180 °
Operating pressure: 180 bar
Electric connection hydraulics: 15 kW
Net weight: tilting table 11tons, folding table 13tons

Turn-Over Table

Turn-Over Table

Request for more Information: please use this form Continue reading

Wire Straightening line EVG-FILZMOSER RA-XE 16/8-2 A8270 **SOLD**

Used Wire Straightening line with hyperbolic rotors EVG-FILZMOSER RA-XE

Brand/Type: EVG RA-XE 16 / 8-2
Year 2005
Specified for double wire / double feed
up to 16 mm (80% more power)

Included:
Run-off table 14 m, for double wire
Pay-offs electrical driven / braked CG 3000
8 pcs. Wire pay-offs, 3 to
Wire coil changing during production
2 pcs. shears for flying cut
Bar collection device 14m

Straightening line

Straightening line

Request for more Information: please use this form Continue reading

Stirrup Bender MEP Mini Syntax A8266 **SOLD**

Stirrup Bender MEP Mini Syntax

7 braked pay-offs, 7 coil holders
pulling winch, MEP auto-diameter change, 12 m collection rack, safety fences

full set of spare parts,
opt to buy an automatic portable wire straightener,
accessory for producing circle stirrups
VERY GOOD condition although 2001 and very low operating hours

Single Strand Processing Wire Diameter Φ6mm-Φ16mm
fy=600N/mm2, ft=700N/mm2
Double Strand Processing Wire Diameter Φ6mm-Φ12mm
fy=600N/mm2, ft=700N/mm2
Square Stirrup Dimensions
Minimum with Φ6mm wire – #2wire (optional bending pin) 80mm x 80mm
Maximum if clockwise 1.500mm x 1.500mm
Maximum if counter clockwise 2.000mm x 2.000mm
Length of Straightened & Cut-to-Length Bars
Minimum 5mm
Maximum (with the existing support guide-collection bench/rack) 12.000mm

Stirrup Bender MEP Mini Syntax

Stirrup Bender MEP Mini Syntax

Request for more Information: please use this form Continue reading

Carousel Line for Floor Panels Production WECKENMANN A17179 **SOLD**

Carousel Line for Floor Panels Production

Brands: WECKENMANN, VOLLERT, NUSPL, FILZMOSER, NETTER, UNITECHNIK, SAA

with 43 pcs moving steel moulds

Dimension of each mould: Length 16.30m, Width: 2.40m

Including:
Demoulding crane, Moulds stacking crane, Plotter and Double cleaning system, Shuttering-transport and cleaning, Oiling system, Concrete Distributor, Vibration: Gyroshake, Full Automatic Reinforcement Center FILZMOSER, Lattice girder preparation with Magnets-Handling,  Steel straightening and cutting machine 5 Lines, Wire Diameters: 6 – 14mm for Longitudinal bars and cross bars with spacers and much more.

Carousel Line

Carousel Line

Request for more Information: please use this form Continue reading

Plotter AVERMANN A8242 **SOLD**

Plotter AVERMANN – FOR SALE

Year: 2012
Condition: almost new, very good
CONTROL: IPC and E-cabinett
Moving area: max: 8500mm x 3600mm
Clear height: 2868mm

The plotter marks slabs cutting lines, rectangles and circles for openings and recesses, texts for identification on cast slab surface or places for dividers and fittings on empty bed surface.

Plotter AVERMANN

Plotter AVERMANN

Request for more Information: please use this form Continue reading

Precast Elevator Shaft Mold NINIVE A8299 **SOLD**

Precast Elevator Shaft Mold

Manufacturer: NINIVE
Year of construction 2011
For the production of Precast Elevator Shaft elements for the vertical floor connection

3 different dimensions available:

1. Precast Elevator Shaft Mold H 3.200
1.600 x 1.750 wall thickness 100 and 120
Complete with base frame
Floor 160 x 175 thickness 10
Floor 160 x 175 thickness 12

2. Precast Elevator Shaft Mold H 3.200
1.600 x 1.800 wall thickness 100 and 120
Complete with base frame
Floor 160 x 180 thickness 10
Floor 160 x 180 thickness 12

3. Precast Elevator Shaft Mold H 3.200
1.600 x 1950 wall thickness 100 and 120
Complete with:
base frame
Floor 160 x 195 thickness 10
Floor 160 x 195 thickness 12

Precast Elevator Shaft Mold

Precast Elevator Shaft Mold

Request for more Information: please use this form Continue reading

Battery Mold 3.0m x 6.5m A8254 **SOLD**

1 used Battery Mold

Face sheets are flat and even
The formwork is complete and functional!

Technical specifications:
4 pouring compartments, size: 3000mm x 6500mm (HxB)
1 fixed outer wall, thickness 780mm
3 movable partitions on rails, thickness 220mm
1 movable outer wall, thickness 780mm on rails
Incl. Work platform, stairs and railings
including 17 pieces built-in BOSCH external vibrator and
1 piece BOSCH frequency converter 1 controller
1 hydraulic unit to close the battery mold
1 built-in heating register in outer and movable partitions

Battery Mold

Battery Mold

Request for more Information: please use this form Continue reading

Mesh cutter HAMBI TV 60 V A8293 **SOLD**

1 used mesh cutter

HAMBI type TV 60 V
Working width: 6m
Maximum power:
12mm x 150mm single bar bar distance
8mm single bar x 100mm bar distance

Control via manual release
-Mesh feeding
-Mesh clamping device
-Cutting motor 2.20 kW
-Clamping motor 0.55 kW
-Transport motor 075 kW
-Side guards right and left
-Safety cordons
-2 mesh hooks
-Incl. Cutting freewheel
-Incl. 2. automatic switches for cutting unit
-Incl. Special cutting motor 3 kw
(recommended for rod 10-12mm)

Mesh cutter

Mesh cutter

Request for more Information: please use this form Continue reading