included are:
1 pc transport cart with lifting device
1 pc energy supply with battery package
3 pcs transport frames with vertical shelfs on the head side
1 radio control for the transport table
25 tons Precast Walls Removal Truck
-year 2014
-with 2 pay-off,
-working hours 3.000, has only worked for a year
Technical specification:
-Single strand dia. : 6-16mm
-Double strand dia. : 6-13mm
-Max bending angle: 180°
-max Pulling speed 130 m/min
Stirrup Bender SCHNELL Prima A9313
1998
Condition: Very good (revised and repainted)
Minimum stirrup to work: 150 x 150 mm
Maximum stirrup to work: 1.500 x 1.500 mm
Ø of the stirrup wire: 6-16 mm
Normal Ø of the long. wire: 4 mm
Pulling speed: 45 m/min
Average energy consumption: 8 kWh
Standard version: 12m
SCHNELL-IDEA
Stema Pedax mod. Twinmaster 16
Year 2003
5 Decoilers
Till 12m, till diameter 16mm
Stirrup Bender STEMA
Brand: SOMMER
for the production of Manhole Bases DN 1000 T1 and T2
Inserting the channel is a subsequent process
Complete Hydraulic system was renewed in 2017/2018
Control: Siemens S7
The max. allover height of the manhole base is 90cm.
Control: MOELLER
Hydraulics: Serviced by Alpine Hydraulics
Manhole Base Production Machine A9331
Brand: NUSPL type Duplex
Very well-maintained condition!
Total length: 21m
Segment lengths 12m + 9m
Max. Production height: 1.200mm
Max. Production width: both sides 800mm each
Incl. central hydro pump unit
With built-on electrical control
Includes 14 pcs High frequency vibrators, BOSCH
Twin column mould
-Pulling,Measuring and Cutting Unit Mod. “CUT LINE”
-max diameter 40mm
-mobile stock for bars with 7 racks for the storage of the bundles of bars
-the maximum length of the bars that can be processed is 14m
-Pulling Unit
-Measuring Unit
-Cutting Unit: following capacitiy
1bar-dia40mm, 2bars-dia.32mm, 3bars-dia.26mm, 4bars-dia.20mm,
-Measuring and Evacuating line
-Distributing Conveyor
-Collecting Unit Rack and more
Rebar Cut Line MEP-OMES A9310
Brand: Longinotti
Year: 2006
Vacuum-Press Process
Slab size: 400mm x 400mm
Thickness: 19mm / 27mm
Ceramicslabs or light slabs for terraces
Shipping feature: Compact plant, easy to ship, Silos screwed, easy to set up, low construction height
Included are:
1. Blasting with dust collector
2. 4-Chamber Series dosage with beltscale
3. 3 Silos for binders, gray and white cement and stone flour
4. 250 Liter Mixer with scale for binders
1125 Circulating sheet pallets are included
Concrete Paving Slabs Press
Type: Automatic Stirrup Bender
Model: Formula 14 Sapiens
Manufacturer: SCHNELL
Year: 2009
Condition: EXCELLENT FULLY Operational Three breaked pay-offs and coil holders
Semi Automatic Diameter Change Single Strand dia: 6-14mm
Double Strand dia: 6-10mm
Stirrup Bender SCHNELL Formula 14 A9311
Stirrup Bender SCHNELL Prima 12R
Year: 2006
working hours: 24290
2 pay-offs
Single strand: 4,2-13 mm
Double strand: 4,2-10 mm
Max bending angle: 180°
Central mandrels: 20-50 mm
Max Pulling speed: 130 m / min
Max Bending speed: 1650° / sec
Average electric power consumtion: 2 kWh
Stirrup Bender SCHNELL 12R A9318
1 used MBK Wire cage welding machine
for round cages
completely overhauled in 2010!
with CPS control Siemens S7
for round reinforcement
For reinforcement cages with….
Cage Welding Machine A9326
1 used Rotor straightening and cutting machine
EVG/FIL RA-XE 10/3
Year of construction: 2008
Consists of:
– 3 pay-offs for steel coils 6, 8, 10 mm
– Straightening and cutting machine
– Spacer clip system
– Cross bar placing system
– Without spacer pots and feeding
Straightening machine for cross wire production of floor slabs EVG/FIL RA-XE 10/3 A9308
Completely reworked,
6 braked pay-offs,
pulling winch, MEP auto-diameter change, 12m run-off
VERY GOOD condition, year 1999, approx.
Single Strand Processing Wire Diameter Φ6mm-Φ16mm
Double Strand Processing Wire Diameter Φ6mm-Φ12mm
Square Stirrup Dimensions
Minimum with Φ6mm wire – #2wire (optional bending pin) 80mm x 80mm
Maximum if clockwise 1.500mm x 1.500mm
Maximum if counter clockwise 2.000mm x 2.000mm
Stirrup Bender MEP Mini Syntax
Monolithic Mould
Dimension: Length 4m x Width 2.50m x Height 3.20m
(Supportconstruction for cables Height 0.80m)
Wall thickness 10cm
External vibrators
Including Electric
Further Equipment:
1 pc Flat roof formwork
1 pc Gable roof formwork
Mould for Electrical Substation
Ø6-Ø12 double wire
Ø6-Ø16 single wire
8 pcs pay-offs, brakes
Output 140 m/min
Double bending device
Wire runoff table 12 m
Collecting cart
Automatic wire change
Automatic straightening
Fast Genius straightening system
Bridge Work Platform
Straightening System Service was done in Oct. 2018 by Schnell engineers
Stirrup-Straightening-Bending machine
Year 2009
Excellent condition, refurbished and revised
Only 3504 hours
Dimensions: 15,000 x 4,000 mm
Reinforcing cage dimension: Minimum 150 x 150 mm, maximum 1000 x 1000 x 8000 mmm
Stirrups diameter: 4-16 mm
Longitudinal wire: 4 to 6 mm
Minimum/Maximum pitch: 50-500 mm
Peak power absorbed: 35 kVA
Normal consumption: 5,5 kVA
Includes: 3 wire pay-offs
MEP Preform Cage Assembler
for Double-Wall production
Manufacturer: SCHWINGHAMMER
Steel covering even for faced concrete
Dimensions per table: 12,50 x 3,50m
Wall thicknesses: 20 – 40 cm
Incl. 2 x 8 pieces vibrators
Incl. hydraulic cylinders
Hydraulic 7.5 kW, 150 l. Tank, 200 bar
Heating pipes for water are installed
Technical specifications:
Usable length: 12.5 m
Usable width: 3.50 m
Height: approx. 1 m
Payload tilting table 750 kg / sqm
Payload Turn-Over Table 400 kg / sqm from 80 ° to 180 °
Tilt angle: approx. 80 ° or 180 °
Operating pressure: 180 bar
Electric connection hydraulics: 15 kW
Net weight: tilting table 11tons, folding table 13tons
Turn-Over Table
Payload 5 t
Weight 3.5 t
4 pcs. ABUS GM6 chain hoists
Filigree floor slab LIFTER
Brand/Type: EVG RA-XE 16 / 8-2
Year 2005
Specified for double wire / double feed
up to 16 mm (80% more power)
Included:
Run-off table 14 m, for double wire
Pay-offs electrical driven / braked CG 3000
8 pcs. Wire pay-offs, 3 to
Wire coil changing during production
2 pcs. shears for flying cut
Bar collection device 14m
Straightening line
with Rollover Bucket, 1125 Liter
2004, Power 7.5KW
Rails approx. 20m
Skip Conveyor DUDIK
7 braked pay-offs, 7 coil holders
pulling winch, MEP auto-diameter change, 12 m collection rack, safety fences
full set of spare parts,
opt to buy an automatic portable wire straightener,
accessory for producing circle stirrups
VERY GOOD condition although 2001 and very low operating hours
Single Strand Processing Wire Diameter Φ6mm-Φ16mm
fy=600N/mm2, ft=700N/mm2
Double Strand Processing Wire Diameter Φ6mm-Φ12mm
fy=600N/mm2, ft=700N/mm2
Square Stirrup Dimensions
Minimum with Φ6mm wire – #2wire (optional bending pin) 80mm x 80mm
Maximum if clockwise 1.500mm x 1.500mm
Maximum if counter clockwise 2.000mm x 2.000mm
Length of Straightened & Cut-to-Length Bars
Minimum 5mm
Maximum (with the existing support guide-collection bench/rack) 12.000mm
Stirrup Bender MEP Mini Syntax
Manufacturer – Mimmo Bendislik – Turkey
Year – 2014
Model / type – TKS – OTO-12
Total lenght – 12 meters
Tunnel profile – R 4.97m – 7.0m
Width of road – 7.56m
…and additional equipment
Motorway Tunnel Formwork System
Brands: WECKENMANN, VOLLERT, NUSPL, FILZMOSER, NETTER, UNITECHNIK, SAA
with 43 pcs moving steel moulds
Dimension of each mould: Length 16.30m, Width: 2.40m
Including:
Demoulding crane, Moulds stacking crane, Plotter and Double cleaning system, Shuttering-transport and cleaning, Oiling system, Concrete Distributor, Vibration: Gyroshake, Full Automatic Reinforcement Center FILZMOSER, Lattice girder preparation with Magnets-Handling, Steel straightening and cutting machine 5 Lines, Wire Diameters: 6 – 14mm for Longitudinal bars and cross bars with spacers and much more.
Carousel Line
Year: 2007
Condition: Very good
Minimum stirrup to work: 150 x 150 mm
Maximum stirrup to work: 1.500 x 1.500 mm
Ø of the stirrup wire: 6-16 mm
Normal Ø of the long. wire: 4 mm
Pulling speed: 45 m/min
Average energy consumption: 8 kWh
Cage-Assembler SCHNELL IDEA
Year: 2005
New Control Computer in 2017
Cutting capacity:
10 x 8, 8 x 10, 6 x 12, 5 x 14
4 x 20, 3 x 25, 2 x 32, 1 x 40
Max. advance speed 2,5 m/s
Drive technology: Electric servomotor
Bar Cutting Bench
Year: 2012
Condition: almost new, very good
CONTROL: IPC and E-cabinett
Moving area: max: 8500mm x 3600mm
Clear height: 2868mm
The plotter marks slabs cutting lines, rectangles and circles for openings and recesses, texts for identification on cast slab surface or places for dividers and fittings on empty bed surface.
Plotter AVERMANN
If we look back at the history of using precast concrete elements in construction, Europe is a success story. We have seen an enormous speed of development in the last 40 years. Especially the emergence of new floor and wall systems together with new production technologies lead to a very high automation and quality level.
But for those who intend to profit from this business there is a huge obstacle on the way: high investment!
There is a solution for this dilemma. In many cases used precast production machinery and equipment is capable to fulfil the task of manufacturing precast concrete elements. And that at prices which are only a fraction of comparable new equipment.
Used precast machinery, used formwork, used wall panel production, used floor slab production systems, used pallets circle lines, used precast carousel lines, used tilting tables, used hollowcore production, used block making machines, used batching and mixing systems, used molds, used concrete pipe machines and so on. The list is almost endless and each interesting precast investor will find the appropriate machinery in reasonable time by using the assistance of GMS, which can be accessed at www.precastplants.com
GMS matches supply and demand for precasters not only in Europe but worldwide. Used precast production machines and equipment are often the first step. The second is Success and Innovation. Contact office(at)gms-global.at
Used-precast-plants and equipment