| Pos | Length meter | Quantity (pcs) | Total running metres | Magnete |
| 1 | 3.00 | 24 | 72 | no magnets |
| 2a | 3.00 | 42 | 126 | Built-in magnets |
| 2b | 3.00 | 40 | 120 | Built-in magnets |
| 3 | 1.00 | 28 | 28 | Built-in magnets |
| 4 | 1.50 | 28 | 42 | Built-in magnets |
| 5 | 2.00 | 28 | 56 | Built-in magnets |
| 444m |
VIDEO LINK WECKENMANN A-Serie
https://www.youtube.com/watch?v=VyF6k15IHVI
SHUTTERS WECKENMANN
Full equipment for the production of concrete pipes and reinforced concrete pipes, manhole rings and cones.
Manufactured by SBM/ Austria 2007
-production of big pipes Height=2500mm, External diameter – max. 3,000 mm
– production of concrete and reinforced concrete rings and cones for manholes
-complete sets of moulds for concrete pipes, manhole rings and cones
Condition: Very good, almost not used
Concrete Pipe Production
Manufacturer: TEKSAM Denmark
Year of manufacture: 2016
Condition: As good as new
Suitable for products up to 5m length, 1,25m width and max. product height of 900mm
Possible finished products: Slatted floors, pavers, U-channels, posts, foundation blocks etc.
Complete production cycle with tilt forming machine, demolding crane, transport system, set-down device
and production pallets.
The plant assemblies:
-Automatic production machine
-Demolding crane
-Transport system for the products
-Settling device
-70 steel pallets for a product area of 5.000 x 1.125mm and a load of 3.500 kg
Tilt Forming Machine TEKSAM
AAC Plant
hydraulic tilt table 16m x 3,50m
year of construction 2005
Surface in good condition, flat and even
8 vibrators BRECON
with heating pipes
3 hydraulic cylinder pairs
M21416-Tilting Table
Hybrid wall production system for basements and building construction
Other possible applications: Production of pools
Special features of the system:
– Basement can be converted into living space
– Dry construction avoids building moisture
– Installation options in the exterior wall
– Climate protection: use of high-quality, ecological building materials
– Less concrete, but cosy interior fittings with gypsum fibre boards, clay boards etc.
– Fast construction, early utilisation
Hybrid Wall Production
Solarmodul Produktion
Battery 9 compartments
Included:
87 vibrators
Converter
Control
TT-Mold
FOR SALE
a used garage mould for the production of prefabricated concrete garages or space cells
Year of construction 2014
ADVANTAGES
Completely hydraulically adjustable garage mould.
Wide range of adjustment options
The following inner dimensions can be adjusted continuously:
width from 2,5m to 4m
length from 6m to 9,8m
Height from 2m to 3m
Garage Mould 2014
1.500 pieces Standard Magnets , 1.200 pieces profiles in different lengths with height 70mm
Preferably use for the production of filigree slabs and twin walls.
Profile list, height 70mm:
250mm length: 165 pieces,
400mm length: 10 pieces x
500mm length: 169 pieces
750mm length: 15 pieces
1000mm length: 220 pieces
2000mm length: 261 pieces
3000mm length: 333 pieces
and 50 pieces x 500mm (residual shuttering)
Includes:
– Magnet and profiles cleaner
– Magnets conveyor belts, profiles conveyor belts
– Steel construction
Magnets and shuttering
of the production plant:
Crushing plant
Conveyance/Silos/Dosing/Weighing
Premixer/Reactor
After-mixer
Presses
Hydraulics
Transfer table
Packing + circulation
Heating/Steam
Autoclaves
Lime-Sandstone-Production
Each: Length: 27m, width 3.50m
Steel surface: straight and even
Condition: well maintained
incl.
Heating pipes
Vibrators
Concrete Casting Bed
to produce hollow core floor slabs
Slipformer with concrete hopper to produce hollow core floor slabes in prestressed concrete. Floor Thickness 150mm, 200mm or 250mm. Hollow core width 1200mm.
The production plant includes:
A Cross Cutting Saw, which is able to cut up to 400m thickness.
A Multifunctional Trolley to prepare the production bed: Cleaning, Pulling strands and spraying oil on to the beds.
The plant is fully refurbished and painted. Year of construction 2002. Can be inspected in operation.
ECHO Slipformer
Binder formwork, girder formwork, box girder formwork, bridge girder formwork
Length 30m
Adjustment via mechanical spindle
– 38 pieces vibrators with remote control, including converter and control
Was in use in 3 variants:
-Prestressed, 1 x with wire strand
-Prestressed, with wire strand and cable
-loosely reinforced
-Component height up to 1,80m
-Wing length: 2 x 1,20m
-Web width: 1,90m
BEAM MOULD 30M
Straight Stair Mould
Universal hydraulic mechanically adjustable
Manufacturer: Schwinghammer
Number of steps: 18
Riser: 16,5cm to 19cm steplessly adjustable
Tread: 25,5cm to 30cm steplessly adjustable
Stair width: 80 – 150cm
Stair Mould SCHWINGHAMMER
Varioflex 18/150, Make HOWAL
Year of manufacture 2010
For stripping, the formwork is tilted up hydraulically by 90°.
working width: 1,5m
no. of steps: 18
riser: 15,5cm – 20cm
tread: 25 – 31cm
Straight Stair Mould
Length: 1,215mm
Diameter: 482mm
Stroke: 250mm
Piston Area: 894.57cm2
Capacity: 5,367 kN
Weight: 600kg
Including hydraulic pump:
Specification R 11.2-11.2
-Operation pressure: 55(60) MPa
-Capacity: 11.2/22.4 l/min
-Weight: 615kg
Stressing Jack DSI Type HoZ 5400/250
Year of construction: 1991
Good, immediately operational state!
Production range: DN 1000 to DN 1500
Max. height: 1500 mm
Incl. discharge, cart brand REKERS
– Machinery frame
– Central vibrator
– Hydraulic aggregate
– Controller
– Header press
– Charging unit
– Base ring inserter
– Discharge-cart
Pallets circle, brand REKERS
Full automated crane manipulator, brand REKERS
Moulds DN 1000
Moulds DN 1500
Manhole Manufacturing Plant COLLE A20365
Year 2010, Brand: Schindler
The line can produce grinded, polished, washed and shotblasted tiles.
The batching plant is designed to feed two presses simultaneously, if needed.
Electric substation and air-compressors are included as well as filter press-pump.
Factory has stopped production since 2018.
Automatic Hermetic-Turntablepress TOP 9000/600T OCEM and further 28 positions, which are described more precise in a customised offer.
Concrete tile production plant SCHINDLER A9346
included are:
1 pc transport cart with lifting device
1 pc energy supply with battery package
3 pcs transport frames with vertical shelfs on the head side
1 radio control for the transport table
25 tons Precast Walls Removal Truck
Monolithic Mould
Dimension: Length 4m x Width 2.50m x Height 3.20m
(Supportconstruction for cables Height 0.80m)
Wall thickness 10cm
External vibrators
Including Electric
Further Equipment:
1 pc Flat roof formwork
1 pc Gable roof formwork
Mould for Electrical Substation
Sign up to our newsletter and to keep up to date on our latest offers and services.