Technical Data
Folding Tables Mould
Hydraulic Tilting Table,
manufactured by Gärtner
– Table dimensions: 7.20 x 3.90 m
– Transport dimensions: approx. 7.30 x 4.00 m
– Tilting axis mechanically adjustable, left or right
– Heating pipes
– With vibrators,
– Steel covering, not suitable for exposed concrete
– Frequency converter for vibrators
– Hydraulic unit
Hydraulic Tilting Table, 7.20 x 3.90 m M25610
Twin Mould for columns
Manufacturer: HOWAL
Type: Hystanplus
– Length of formwork: 15 m
– Max. chamber dimensions: 80 x 80 cm
– Min. chamber dimensions: 25 x 25 cm
– Steel formwork with wooden planking
– Includes 8 vibrators
– Includes control system
– Formwork is hydraulically movable
– With hydraulic unit
Twin Mould for columns HOWAL Hystanplus 15m M25609
Casting Beds 70 m long, (formwork table, formwork bed)
Width 2.50 m
Composed of 6 x 12 m sections, each weighing 6 tonnes
Vibration is performed by the travelling paver
Manufacturer: SCHWINGHAMMER
For the production of precast slabs with lattice girders
Finished product width 2.50 m
Bed length: 70 m
Casting Beds
Folding Tables
M25596 Roof Truss Mold
Length: 31m, Height: 2m, Opening: 10-140cm
M25597 Bridge Girder Mold
Length: 33m, Height: 1.56m, Opening: 10-130cm
M25598 Universal Beam Twin Mold
Length: 39m, Height: 1.55m, Opening: 0.90m
M25599 Column Twin Mold
Length: 15m, Height: 0.80m, Opening: 0.80m
M25596 Truss Molds
Reselling a NEW HOWAL variotop-combi stair mold for the production of straight prefabricated stairs with landings in overhead or side position.
Prefabricated Stairs Dimensions:
HOWAL Stair Mold
Further Dimensions:
Reinforcement mesh can be custom-manufactured in a wide variety of grid patterns, dimensions, and wire diameters based on CAD specifications.
Each mesh is produced with zero waste and without the need for time-consuming cutting, unlike conventional standard mats.
The modular design of the welding system allows for precise adaptation to individual customer requirements.
Progress M-System Mesh Welding Machine
A complete production plant for manufacturing hollow core planks is available for sale in mint condition.
Has not been installed since its delivery in 2019.
The slipformer can further be used to produce foundation piles, solid slabs, beams, lintels, gutters, vine stakes, and even prefabricated slabs with insulation and integrated heating and cooling systems.
List of Equipment
Slipformer ECHO
With moulding cassettes for thicknesses 150 mm – 500mm.
Including all accessories and spare parts.
Concrete Extruder Hollowcore
Straightening and cutting machine with bending form No. 4.
Cross transfer unit:
Progress MSR16/5
Rotor-Straightener with double bending and a distribution magazine.
Progress MSR16/5 Straightener and Doublebender
Carousel Wall Production Line with Pallets 800 x 400 cm
Circulating Pallets
VOLLERT Carousel Wall Production
Carousel Line with Pallets 800 x 360 cm
Circulating Pallets
VOLLERT Carousel Plant – Pallets 8 M x 3.6 M
Manufacturer: Weiler (now Maxtruder)
Year of manufacture: 2008
Operation: never been used.
WEILER/MAX-truder for hollow core slab and hollow wall production.
The line includes:
Weiler Extruder HC Line
This offer comprises 2 ELEMATIC production lines and also includes a FRUMECAR batching plant.
Acotec panels are precast, non-load bearing partition walls.
They are room-high (max. 3.20m) and 600 mm wide, with a tongue and groove design along the vertical edge.
The panels are 6 times faster to install than traditional brickwork and twice as fast as blockwork.
ACOTEC Video Links
Acotec Partition Wall Installation:
https://www.youtube.com/watch?v=QtIMyD68LlE
Acotec Elematic Production Line:
https://www.youtube.com/watch?v=iR7xVL6N3ZI
ACOTEC Production Line ELEMATIC M24515
LIFT SHAFT MOLD 1: 1600 x 1750 mm
LIFT SHAFT MOLD 2: 1600 x 1800 mm
LIFT SHAFT MOLD 3: 1600 x 1950 mm
For the production of lift shaft elements for vertical storey connection.
Delivery of considerable advantages for prefabrication in terms of time, costs, and flexibility.
Inserts, empty conduits, and switch bushes for the electrical installation can be installed according to the customer’s plans. The need for subsequent surface installation is superseded.
Time-saving installation aids such as anchor rails, transport anchors, scaffolding sleeves, anchors, etc., are already installed at the factory.
The smooth formwork on visible surfaces can be left unfinished, plastered, or painted over.
Production in the factory results in very accurate dimensions.
Short assembly times.
Precast Lift Shaft Mould
This tilting lay machine is suitable for producing large-format components in the immediate demoulding process.
The machine was used for test purposes only!
The Tilting Lay Machine is suitable for producing large-format components in the immediate demoulding process.
The most suitable components are bar-shaped, plate-shaped, or frame-shaped.
These can be foundations, slab and floor slabs, U-shaped shells, shaft bodies, angle elements, or large-format bricks.
The high daily capacity with only one mould and two workers poses a significant advantage.
The Humbarbo PXV-3 is a floor-moulding machine that demoulds concrete products by tipping them onto a flat floor or pallet (wood, steel). It is suitable for reinforced or non-reinforced products.
HUMARBO
This floor machine was manufactured in 2004 and was first used in January 2005.
Includes:
Coote Hollow Core Floor Production
The system can display the contours of different components, recesses, and lattice girders separately.
Accuracy is assured by independent calibration of the laser projector. The laser system is set up fully automatically and quickly for accurate projection results.
Mecoon Laser Projection System
Mobile access aid for a precast tilting and lifting station.
The electrically movable access aid (ladder) runs along a rail fixed to the floor.
This allows for quick access to the upper end of the elements and safe work at height, particularly for tasks such as attachment to cranes.
The speed of the longitudinal movement is infinitely variable.
Common installation takes place along a tilt table.
Mobile access aid NUSPL
The offer includes 4 pallets of steel edge formwork.
These add up to 944 m for the lining of circulation pallets for the production of filigree floor slabs, double walls, or solid walls.
Steel Edge Formwork
To determine the worth of your production machine/plant, send us some basic information like:
Send us an e-mail to or use the Request Form below:
How much can I get for my used machine ?
HOWAL HYSTANPLUS Column/Beam Mould
25.00 m Hystanplus universal mould, type 80/120
as twin mould, divisible in the middle into two sections, which
can be moved both individually and coupled.
– The maximum usable width per concreting side is 80 cm
– The maximum usable height per concreting side is 1.20 m
Includes longitudinally adjustable steel frame for external wooden cladding (21 mm formwork skin).
HOWAL HYSTANPLUS Column/Beam Mould
AVERMANN hydraulic tilting tables
2 available
Year 1993
Good condition
Data
– Table dimensions 8.00 x 4.00 m
– Includes: 6 Bosch 200 Hz vibrators
– Hydraulic unit installed in the table
Tilting Table 8x4m
Battery mold with 10 compartments
Year of construction 2017
– Compartment dimensions: 8.00m x 3.5m
– 9 partition walls (a’ 6to)
– 2 outer walls (a’ 10to)
– suitable for precast wall thicknesses: 10cm to 20cm
– surfaces 8 mm like new as used only few months.
– Hydraulic system
– 33 vibrators !!
– heating pipes inside the cells (never used), steam connection possible
– full set of 120 mm side closures
– about 1000 m of sealing tape for sides as never changed!
M25588-Tecnocom BAT10
Table No.1, 12.75m x 4.20m M25592
Table No.2, 12.52m x 4.13m M25593
Table No.3, 11.30m x 4.50m M25594
Table No.4, 7.53m x 4.50m M25595
all of them including:
Hydraulic Cylinders, hydraulic station,
Vibrators and Converter for vibrators,
Operation panel
Upstands
Condition: 8mm sheet, Used, but flat, even, not wavy, not warped.
Tilt Table NUSPL 4x
M25589
Mould A 24 m, Max. cross-section
– 1.7 m high, – 0.7 m wide
Mould B 24 m, Max. cross-section
– 1.0 m high, – 0.7 m wide
M25591
Length 2 x 23.50 m
Cross-section: 0.90 x 0.80 m
Foot 1: 4.29 m wide, 3.20 m high
Foot 2: 3.60 m wide, 2.60 m high
Foot 3: 4.00 m wide, 3.40 m high
Beam Moulds
consisting of straightening machine, transfer robot and lattice girder assembly.
Year of manufacture: 2022
This modern production plant will be available at the end of 2025, as the customer is installing a new mesh welding plant at this location.
Suitable for reinforcing steel preparation for a wide range of precast concrete products. Most efficient for use in precast floor slabs and double wall production.
Technical data:
SCHNELL straightening, cutting and bending machine
Type LISTA BEND 16/5-12
– Wire diameter from 8 to 16 mm, coil weight up to 5 t
Steel Automation for Carousel Lines, SCHNELL-AWM 2022 M25580
Filigran Floor Production Bed
Casting beds for the production of floor element half-slabs with lattice girders.
Casting Beds Filigran Floor Halfslab
Fully automated steel processing (FILZMOSER),
including longitudinal wire straightening machine with hyperbolic rotor (diameter: 6-14 mm).
Also includes:
Floor Slab (Filigree) Carousel
HOWAL DELTA Staircase Mould Ramp
The HOWAL VARIOPLUS stair mould is designed for concreting fair-faced concrete stairs in the lateral concreting position.
Stair mould sideways, upright
Year of construction: 2000
Number of steps: max. 18 per mould
Tread width: max. 1.60m
Tread: 25-30cm
Gradient: 16-20cm
StairMould 160cm wide
The VARIOPLUS stair mould is designed for the concreting of fair-faced concrete stairs in the lateral concreting position.
Stair mould sideways upright
Year of construction 2000
Number of steps: max. 18 per mould
Tread width: max. 1.80m
Tread: 25-30cm
Gradient: 16-20cm
M25566-Stair Mould 180
12 Moving Welding Heads
Year: 2019.
Condition: Very good
Mesh width: up to 4m, min. width: 500mm,
Length: up to 12m, min. length: 1m,
Max. bar length: 12m, min. bar length: 500mm,
Wire diameters: 6-16mm(#5),
Diameter changeover: fully automatic;
Line wire diameter: (5)-6-8-10-12-14-16mm,
Bar on bar welding: 16mm on 16mm,
Crosswire dia.: (5)-6-8-10-12-14-16mm
Wire preparation: the MMR 16 2×4 multiple rotor straightener and cutter
automatically prepares on two production lines the longitudinal and crosswires;
Progress M-System
Column formwork with foundation footing (twin mould) L=23.50m
Very flexible adjustable formwork, mechan. manually adjustable
Length: 23,5m
Chamber size: width 0,95m, height 1m (expandable up to 1,65m, for this purpose
formwork parts are available)
Foundation base: 3m x 3m x 1,10m, footing formwork on both ends
Vibrators: 6 pieces at the base
The rest will be done with bottle vibrators.
Formwork stands on concrete foundation feet
Column Mould PREQAST
Size: 14m x 4m
Height floor to top: 750mm
2 hydraulic cylinders
Sheet thickness 8 mm
Load capacity 750kg/m2
Transport dimensions L/W/H: 14.00 m / 4.00 m / 0.80m
Weight approx. 14 tonnes
Surface in good condition
Hydraulic Pack
Accessories
3 Tilting Tables are available
TILTING TABLE 14M X 4M
Production of room modules for building construction, technical modules or garages
Application examples: Up to 4-storey buildings, such as residential buildings, offices, hotels, prisons, transformer stations, water pumping stations, pressure control systems, biomass heating systems, technology and storage rooms, care homes, energy stations, wine cellars, waste and oil storage, PV technology modules
Scope of delivery:
1) Concrete room cell mould system, flexibly adjustable up to L=6.90m, W=3.81m
2) Concrete room cell mould system, flexibly adjustable up to L=9.0m, W=3.45m
3) Complete concrete room cell mould system with fixed dimensions 6000 x 2950 mm
4) Heavy-duty crane frame ROTHMUND RT 25 tonnes
5) Heavy-duty crane frame, rotating, SCHWINGHAMMER 20 tonnes
6) Steel concrete mould table, 8000 x 3500 mm
7) Mobile concrete element transport table, 8000 x 4300 mm
room modules production
Sandwich Wall Production with 4 Pallets
Precast Tables 4.60m x 6.50m
Set of 6 pieces fixed casting tables with vibrators for precast elements
Flat steel sheet and heating pipes
5 vibrators per table
consists of:
3 pieces precast casting table
Shuttering plate dimensions 4.60 x 6.50m
weight approx. 5to
1 piece precast casting table
Shuttering plate dimension 4.60 x 7.00m
Weight approx. 5to
1 piece precast casting table
Shuttering plate dimension 3.80 x 5.00m
Weight approx. 4to
1 piece precast casting table
Shuttering plate dimension 3.80 x 6.34m
Weight approx. 4to
Casting Tables
Complete Dry Cast production system includes:
– Feed Hopper
– Mould
– Mould/Core Carrier
– Pallet Transfer Conveyor
– Mould Spray Unit
– Pallet Handler and much more
Detailed Specification:
CASTING MODULE
• Mould area: 7.0 meters long x 0.600 meters wide
• Product height: 150mm
• Product weight: 1400 kg.(max)
Precast Hollow Core Floor Production System
3 pcs Tilting Table S5-750h
Year 2018
3.8m x 13.5m
max. load 750 kg/m2
2 pcs Tilting Table S5-750h
Year 2018
4.2m x 13.5m
max. load 750 kg/m2
Hydraulic Tilting Tables M24528
Filigran Floor and Twin-Wall Carousel
Manufacturer : SKAKO
Control system : OSD Schenk
Master computer: SAA
Daily output: approx. 750 – 800 sqm/day
PALLETS
80 steel pallets (moulds): Dimension: 3 x 9m and 2.5 x 14m,
Pallets are transported from station to station by roller blocks, driven by friction wheel,
Condition of the pallets: “Very good”
Complete Plant
Carousel
AAC Plant
hydraulic tilt table 16m x 3,50m
year of construction 2005
Surface in good condition, flat and even
8 vibrators BRECON
with heating pipes
3 hydraulic cylinder pairs
M21416-Tilting Table
Hollowcore Planks Production Line
for the the production of Prestressed Hollowcore Planks
Width: 1200mm (48″)
Thickness: 200/240mm (8″/10″)
Brand: ELEMATIC
Year: 2010
Condition: Very good, no wear and tear
Location: South East Asia
The plant is consisting of:
Concrete transportation shuttle EB405 E 2.0
141mtr Automation of concrete edistribution System ES
Extruder EL900E
Bedmaster EL 400/LPG
Gutter Brush for Bedmaster EL400
Casting beds EL 120/M, 600 mtr
Stressig Abutment EL234/300mtr, 5 pairs
Single stressing device EL253/16t/500mm PAUL
etc.
Hollow Core Production Line ELEMATIC
TILTING TABLE 3.3M X 15M
Battery 9 compartments
Battery Mold
Twin Wall Pallets Carousel
Sign up to our newsletter and to keep up to date on our latest offers and services.