surface in good condition, flat and level
incl. vibrator, hydraulic cylinders,
hydraulic unit, some with heating pipes
M23476 12.80m x 4.50m
M23478 8.76m x 4.40m
M23480 9.35m x 4.30m
TILTING TABLE PREQAST
Included:
87 vibrators
Converter
Control
TT-Mold
Year of construction 2008
The formwork was barely used!
Support from base: 800 x 40 x 60 cm
Transition to the rejuvenation: L = 20 cm
Rejuvenated part: 500 x 24 x 60 cm
Base: 200 x 290 x 50 cm
Support: One longitudinal side formwork height (60cm) rigidly connected to the ground,
one longitudinal side hinged.
No external vibrators installed, since it was compacted by means of a vibrating bottle.
Weight: 4.5 t
Column Formwork
FOR SALE
a used garage mould for the production of prefabricated concrete garages or space cells
Year of construction 2014
ADVANTAGES
Completely hydraulically adjustable garage mould.
Wide range of adjustment options
The following inner dimensions can be adjusted continuously:
width from 2,5m to 4m
length from 6m to 9,8m
Height from 2m to 3m
Garage Mould 2014
Set of Stair Formwork U-shaped for Sale, left and right:
Condition: Very good
Set, left and right formwork, step height 18.33cm
Each side of the staircase has smooth face concrete, except the cast-in side.
Basic formwork for 19 steps. Running width 1,0m Gradient: 17.9/18.33cm Step: 26cm
The Stair Formwork U-shaped is mounted on a base frame. The step plates are made of 6mm folded sheet metal. The soffit is curved and stiffened from 4mm sheet metal.
The side shuttering is provided with screws, including adhesive seal and triangular strip for the soffit.
Casting with flowing concrete is done from above. ( = front side of the stairs).
Staircase Formwork U-shaped
WECKENMANN
Year of manufacture 03/2019
Dead weight: 1600kg
Payload max.: 2,5m3 / 5000kg
Bucket: 1200mm
Max. permissible grain size: 16mm
Spiked roller, power: 1,2/ 1,8kW
Slide opening, power: 0,6kW
400V/50Hz
Concrete spreader bucket WECKENMANN
of the production plant:
Crushing plant
Conveyance/Silos/Dosing/Weighing
Premixer/Reactor
After-mixer
Presses
Hydraulics
Transfer table
Packing + circulation
Heating/Steam
Autoclaves
Lime-Sandstone-Production
Each: Length: 27m, width 3.50m
Steel surface: straight and even
Condition: well maintained
incl.
Heating pipes
Vibrators
Concrete Casting Bed
Binder formwork, girder formwork, box girder formwork, bridge girder formwork
Length 30m
Adjustment via mechanical spindle
– 38 pieces vibrators with remote control, including converter and control
Was in use in 3 variants:
-Prestressed, 1 x with wire strand
-Prestressed, with wire strand and cable
-loosely reinforced
-Component height up to 1,80m
-Wing length: 2 x 1,20m
-Web width: 1,90m
BEAM MOULD 30M
Length 25,6m consisting of
2 transportable lengths of 12.800mm each
total width 3400mm, height approx. 1800mm
year of construction 1989
Fully functional
complete with hydraulic unit
without external vibrators
Beam Column Mould
with 3 cylinders
Make NUSPL
Year of manufacture 1999
Upstands 3-sided height adjustable from 12 to 35 cm
Production dimension length: 14.00 m, width: 4.50 m
Plate thickness: 10mm !
Max. Load: 750kg/m2
14 vibrators WACKER
with 3 cylinders
Make NUSPL
Year of manufacture 10/2000
upstands 3-sided height adjustable from 12 to 35 cm
Production dimension length: 11.00 m, width: 4.50 m
Plate thickness: 10mm !
Max. Load: 750kg/m2
Surface in good condition
9 vibrators BRECON
Tilting Table M21409
with 3 cylinders
Make NUSPL
Year of manufacture 2007
Upstands 3-sided height adjustable from 12 to 35 cm
Production dimension length: 16.00 m, width: 4.70 m
Plate thickness: 10mm !
Max. Load: 1000kg/m2
Surface in good condition
16 vibrators WACKER
Tilting Table M21410
Manufacturer: SCHWINGHAMMER,
Year of manufacture: 1995
Formwork elements, consisting of:
– 4 pieces each 10 meters long, each with 5 pieces 250V Bosch external vibrators
– 1 piece with 12 meters length and 6 pieces 250V Bosch external vibrator
The basic width of each formwork section is 2.42 metres.
Each formwork part has a height of 1.58 metres.
Condition: Good
Column Mould 52m
Year of construction = 2010, Manufacturer: Avermann Maschinenfabrik GmbH, Germany, total weight = 15.2 To
Consists of:
– 1 Hydraulic large surface table 15.0m x 4.0m (7.5 kN/m2, payload max. 40 To)
– 1 thermal oil heating register for tilting table
– 10 spanning beams
– 13 Brackets for vibrators
Tilting Table 15x4m A20386
Hydraulic Tilting Table AVERMANN 8 x 3.8m
Manufacturer: Avermann
Dimensions: approx. 8.0 x 3.8m
Casting Area: 8.0 x 3.65m
Sideform at the sub-edge
Incl. Hydraulic Station
No vibrators
Heating pipes installed
TILTING TABLE AVERMANN 8X3.8M
from a circulation line
Length 12950 mm
width 3300 mm (without fixed edge)
Fixed edge is 120 mm from the edge
Load capacity approx. 22 to
Surface with grooves and slight unevenness.
Mould tables
Year of construction: 2007 (very little use)
Manufacturer: Macfab
150mm deep, 127mm wide
The set is self stressing 12 beams wide and consists
of 12 number 6.0m beds including the ends with safety barriers
Features:
Self Stressing unit no need for buried anchored ends.
Modular sections means bed lenght can vary.
Superior finish.
Special concrete cutting equipment is not needed.
A budget solution for pre-stressed flooring.
Size of beams give easy access and lifting onsite.
Floor T-Beam Moulds
Manufacturer: Schwinghammer
Dimensions: approx. 16.00 x 4.10m
Steel sheet 8mm for face concrete
Sideform at the sub-edge
Incl. Hydraulic Station
Incl. 12 pcs external vibrators WACKER
Incl. Heating pipes
Tilting Table SCHWINGHAMMER A20360
Year: 2005
Upgrades: 2007 new gripper, 2012 new X-Drive
Moves shuttering profiles in
X-axis: 7.7m
Y-axis: 4.8m and
Z-axis: 1m
Includes:
– steelframe and driveway
– shuttering profiles magazines
– automatic calibration Station
– control cabinet( UNITECHNIK)
Shuttering Robot WECKENMANN 2005 A9322
Manufacturer: Schwinghammer
Dimensions: approx. 16.00 x 4.30m
Steel sheet 8mm for face concrete
Sideform at the sub-edge
Incl. Hydraulic Station
Incl. 12 pcs external vibrators WACKER
Tilting Table SCHWINGHAMMER A20359
Length: 13.10 x 4,10 m
Casting area: length 12.95 x 3.98 m
Steel sheet
10 pcs external vibrators
Side form left/right height 0.18 m
Side form at turning edge, height 0,18 m
No heating pipes
Hydraulic unit for 2 tables
Tilting table 13.10 x 4.10m
FOR SALE
Concrete Casting Table
Dimensions : 12,5m x 3,5m x 0,55m
Heating pipes
Without vibrator
Indoors until April 2020, stored outdoors since May 2020
Concrete Casting Table fixed 12.5 x 3.5m
Length: 13.40 x 4,08 m
Casting area: length 13.22 x 4.03 m
Steel sheet
10 pcs external vibrators
Side form left/right height 0.18 m
Side form at turning edge height 0,195 m
No heating pipes
Hydraulic unit for 2 tables
Tilting table 13.40 x 4.08m
Mould No.1
Year 1994. Max. Dimension 80 x 100cm, Length 24m (3 parts 1x12m, 2x6m)
Height 1.60m, Width over all 2.40m, 1-sided stroke, Shipping length 1x12m, 2x6m
Included: 12 vibrators
Mould No.2
Year 1995. Max. Dimension 80 x 80cm, Length 20m (3 parts 1x8m, 2x6m)
Height 1.51m, Width over all 2.40m, 1-sided stroke, Shipping length 1x8m, 2x6m
Included: 10 vibrators
Mould No.3
Year 1995. Max. Dimension 80 x 120cm, Length 20m (3 parts 1x8m, 2x6m)
Height 2.20m, Width over all 2.40m, 1-sided stroke, Shipping length 1x8m, 2x6m
Included: 10 vibrators
Column-Beam-Moulds
54m bed, 10 beams, A20373 consists of:
9 Segments each 6.0m and 10 beams
The width of the bed is up to 2060mm and 450mm high. Weigth: each section approx. 1 ton, end section 1.5 tons. Overall approx: 11tons
Each bed fits on one truck easily.
TEE BEAM Molds
Combination Merten Mould and self-construction
Number of vibrators: 17 pcs. (Bosch company)
Control system: Yes
Traversing technology: hydraulic
Side formwork can be moved sideways to the right
Length max. 38 m
Max. width of upper chord 1012 mm
Mould: completely made of steel
Sloped I-shaped Beam Mould – 38m A9329
Fabricant: Ninive Casseforme, Italy
20 vibrators (Company Wacker)
Control system: Yes
Traversing technology: hydraulic
Side formwork left 150 mm laterally movable
Side formwork right 840 mm laterally movable
variable web height, 700 or 900 mm
Length of mould max. 63 m
Max. width of upper chord 400 mm
Concrete Girder Mould 63m A9328
Complete casting bed equipment from PAUL for prestressing large precast concrete beams and girders
For main reinforcement and upper reinforcement.
Abutment anchor posts,
transverse anchor plates,
detensioning equipment,
vertically adjustable supports,
guards
safety devices
detensioning cylinders with support sleeves
Prestressing casting bed equipment PAUL A9332
included are:
1 pc transport cart with lifting device
1 pc energy supply with battery package
3 pcs transport frames with vertical shelfs on the head side
1 radio control for the transport table
25 tons Precast Walls Removal Truck
Brand: NUSPL type Duplex
Very well-maintained condition!
Total length: 21m
Segment lengths 12m + 9m
Max. Production height: 1.200mm
Max. Production width: both sides 800mm each
Incl. central hydro pump unit
With built-on electrical control
Includes 14 pcs High frequency vibrators, BOSCH
Twin column mould
Monolithic Mould
Dimension: Length 4m x Width 2.50m x Height 3.20m
(Supportconstruction for cables Height 0.80m)
Wall thickness 10cm
External vibrators
Including Electric
Further Equipment:
1 pc Flat roof formwork
1 pc Gable roof formwork
Mould for Electrical Substation
Manufacturer – Mimmo Bendislik – Turkey
Year – 2014
Model / type – TKS – OTO-12
Total lenght – 12 meters
Tunnel profile – R 4.97m – 7.0m
Width of road – 7.56m
…and additional equipment
Motorway Tunnel Formwork System
Sign up to our newsletter and to keep up to date on our latest offers and services.