AVERMANN hydraulic tilting tables
2 available
Year 1993
Good condition
Data
– Table dimensions 8.00 x 4.00 m
– Includes: 6 Bosch 200 Hz vibrators
– Hydraulic unit installed in the table
Tilting Table 8x4m
Fully automated plant for sale.
Wet-Cast Pipe Production
Twin Mould for columns
Manufacturer: HOWAL
Type: Hystanplus
– Length of formwork: 15 m
– Max. chamber dimensions: 80 x 80 cm
– Min. chamber dimensions: 25 x 25 cm
– Steel formwork with wooden planking
– Includes 8 vibrators
– Includes control system
– Formwork is hydraulically movable
– With hydraulic unit
Twin Mould for columns HOWAL Hystanplus 15m M25609
Battery mold with 10 compartments
Year of construction 2017
– Compartment dimensions: 8.00m x 3.5m
– 9 partition walls (a’ 6to)
– 2 outer walls (a’ 10to)
– suitable for precast wall thicknesses: 10cm to 20cm
– surfaces 8 mm like new as used only few months.
– Hydraulic system
– 33 vibrators !!
– heating pipes inside the cells (never used), steam connection possible
– full set of 120 mm side closures
– about 1000 m of sealing tape for sides as never changed!
M25588-Tecnocom BAT10
Lattice Girder Processing
Table No.1, 12.75m x 4.20m M25592
Table No.2, 12.52m x 4.13m M25593
Table No.3, 11.30m x 4.50m M25594
Table No.4, 7.53m x 4.50m M25595
all of them including:
Hydraulic Cylinders, hydraulic station,
Vibrators and Converter for vibrators,
Operation panel
Upstands
Condition: 8mm sheet, Used, but flat, even, not wavy, not warped.
Tilt Table NUSPL 4x
M25589
Mould A 24 m, Max. cross-section
– 1.7 m high, – 0.7 m wide
Mould B 24 m, Max. cross-section
– 1.0 m high, – 0.7 m wide
M25591
Length 2 x 23.50 m
Cross-section: 0.90 x 0.80 m
Foot 1: 4.29 m wide, 3.20 m high
Foot 2: 3.60 m wide, 2.60 m high
Foot 3: 4.00 m wide, 3.40 m high
Beam Moulds
consisting of straightening machine, transfer robot and lattice girder assembly.
Year of manufacture: 2022
This modern production plant will be available at the end of 2025, as the customer is installing a new mesh welding plant at this location.
Suitable for reinforcing steel preparation for a wide range of precast concrete products. Most efficient for use in precast floor slabs and double wall production.
Technical data:
SCHNELL straightening, cutting and bending machine
Type LISTA BEND 16/5-12
– Wire diameter from 8 to 16 mm, coil weight up to 5 t
Steel Automation for Carousel Lines, SCHNELL-AWM 2022 M25580
Twin wall and floor slab pallet carousel incl. turn-over crane for twin wall.
PALLETS CIRCULATION
STRIPPING AND LIFTING
CLEANING, FORMWORK, AND OILING
CONCRETE SPREADER AND VIBRATING STATION
TURN-OVER CRANE
HARDENING CHAMBER
CABINETS WITH CONTROL
Double Wall Carousel
The BOS BBM production line is used to manufacture dry-cast concrete elements, e.g., slatted floors, concrete slabs, ventilation floors, manhole covers, etc.
Consists of:
Includes approx. 20 moulds for the production of various products
Dry-Cast Products Machine
Filigran Floor Production Bed
Casting beds for the production of floor element half-slabs with lattice girders.
Casting Beds Filigran Floor Halfslab
The WECKENMANN plotter uses colour to draw outlines of the panels and various information as required.
The pallet is cleaned by moving the RP device over the entire length.
For more innovative products, visit:
www.preqast.com
Plotter and pallet cleaning system
2 sets of folding tables for twin-wall production (consisting of 4 tables)
Used for face concrete
Including:
VIDEO LINK on YouTube:
https://youtu.be/HmyNXPCOEyE
Folding Tables
Fully automated steel processing (FILZMOSER),
including longitudinal wire straightening machine with hyperbolic rotor (diameter: 6-14 mm).
Also includes:
Floor Slab (Filigree) Carousel
HOWAL DELTA Staircase Mould Ramp
The VARIOPLUS stair mould is designed for the concreting of fair-faced concrete stairs in the lateral concreting position.
Stair mould sideways upright
Year of construction 2000
Number of steps: max. 18 per mould
Tread width: max. 1.80m
Tread: 25-30cm
Gradient: 16-20cm
M25566-Stair Mould 180
The HOWAL VARIOPLUS stair mould is designed for concreting fair-faced concrete stairs in the lateral concreting position.
Stair mould sideways, upright
Year of construction: 2000
Number of steps: max. 18 per mould
Tread width: max. 1.60m
Tread: 25-30cm
Gradient: 16-20cm
StairMould 160cm wide
RADIALPRESS is characterised by the technology of “Counter-rotating compression tool”
In USA it is also well known as PACKERHEAD Technology.
Max. Concrete Pipe Diameter is 900mm (1000mm)
PFEIFFER, which is now Prinzing-Pfeiffer, represents the world‘s largest number of installed systems with counter-rotating compression tool, is mainly responsible for the development of the modern radial-pressing-method. The counter-rotating compression tool and the fully automatic compaction control is a prerequisite for the tension-free and complete embedding of the reinforcement
VIDEOLINK YOUTUBE
Radialpress
12 Moving Welding Heads
Year: 2019.
Condition: Very good
Mesh width: up to 4m, min. width: 500mm,
Length: up to 12m, min. length: 1m,
Max. bar length: 12m, min. bar length: 500mm,
Wire diameters: 6-16mm(#5),
Diameter changeover: fully automatic;
Line wire diameter: (5)-6-8-10-12-14-16mm,
Bar on bar welding: 16mm on 16mm,
Crosswire dia.: (5)-6-8-10-12-14-16mm
Wire preparation: the MMR 16 2×4 multiple rotor straightener and cutter
automatically prepares on two production lines the longitudinal and crosswires;
Progress M-System
Column formwork with foundation footing (twin mould) L=23.50m
Very flexible adjustable formwork, mechan. manually adjustable
Length: 23,5m
Chamber size: width 0,95m, height 1m (expandable up to 1,65m, for this purpose
formwork parts are available)
Foundation base: 3m x 3m x 1,10m, footing formwork on both ends
Vibrators: 6 pieces at the base
The rest will be done with bottle vibrators.
Formwork stands on concrete foundation feet
Column Mould PREQAST
Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 12m
Year: 2006
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds
– inludes various bending mandrels
SCHNELL Robomaster
Size: 14m x 4m
Height floor to top: 750mm
2 hydraulic cylinders
Sheet thickness 8 mm
Load capacity 750kg/m2
Transport dimensions L/W/H: 14.00 m / 4.00 m / 0.80m
Weight approx. 14 tonnes
Surface in good condition
Hydraulic Pack
Accessories
3 Tilting Tables are available
TILTING TABLE 14M X 4M
Fully automatic production line
based on RADIAL PRESS or PACKERHEAD Technology.
Concrete Pipe Plant BFS
DN300-DN1200
Type: 1230
Condition: Very good
The SOUVERAEN is the BFS pipe machine for high-performance production with first-class product quality.
The counter-rotating pressing tool takes over the concrete compaction and is controlled by a sophisticated control system.
The feeding of the concrete will be torque controlled, instead of concrete weight in standard systems. So the compaction quality is always secured.
Condition: is in very good shape and well maintained.
Output: 42 pipe/hour up to DN 400 and about 200 DN1200 pipes in 8 hours shift.
Pipes are 2.5 meters tall.
VIDEO link to Youtube, info BFS Souveraen
https://www.youtube.com/watch?v=WLSpLBzW5jg
BFS-SOUVERAEN PREQAST-M24516
Floor Slabs Carousel
Fixed table for the production of lattice girder floor slabs
BRAND: CONSTRUX
Dimensions:
Length 16m
width 3m
Transport width 3.06m
approx. 5 years old
Includes:
10 pieces vibrator
Heating register
Edge formwork with 45° phase
Construx Floorslabs Mould Table
Powerful rotor straightening machine with
8 tracks (8 different diameters) and
2 flying shears
Manufacture of straightened bars up to 14m from the wire coil
Built in 2005
Wire diameter from 8mm to 16mm
Special technical features:
1. Fully automatic diameter change
2. Constant access to all diameters
3. 2 flying shears in parallel operation, guaranteeing high performance
Rotor straightening machine RA-XE 16-8-2
with Pull-In System
for bar diameters up to 40mm
Built in 2011
Length 16.7m
Width 2.25m
Height 2.40m
Fully operational
Available from January 2025
EVG-BVM rebar centre
with 3 hermetic presses
mould sizes: 40×40, 40×60, thickness 4 and 5cm
consists of:
1) Press: Longinotti Meccanica type K607/s
2) Press: Longinotti Meccanica type K256/E
3) Press: OCEM type OPA/650
4) Calibration: Breton make
5) Grinding line: Breton make
6) Automatic edging/bevelling machine: Ernst Bauer u. Sohn GmbH
7) Shot peening machine: Konrad Pump type 20-G-600/2
8) Packing: Ernst Bauer u. Sohn GmbH
Production of terrazzo tiles M21402
Production of room modules for building construction, technical modules or garages
Application examples: Up to 4-storey buildings, such as residential buildings, offices, hotels, prisons, transformer stations, water pumping stations, pressure control systems, biomass heating systems, technology and storage rooms, care homes, energy stations, wine cellars, waste and oil storage, PV technology modules
Scope of delivery:
1) Concrete room cell mould system, flexibly adjustable up to L=6.90m, W=3.81m
2) Concrete room cell mould system, flexibly adjustable up to L=9.0m, W=3.45m
3) Complete concrete room cell mould system with fixed dimensions 6000 x 2950 mm
4) Heavy-duty crane frame ROTHMUND RT 25 tonnes
5) Heavy-duty crane frame, rotating, SCHWINGHAMMER 20 tonnes
6) Steel concrete mould table, 8000 x 3500 mm
7) Mobile concrete element transport table, 8000 x 4300 mm
room modules production
Used EVG stirrup bending machine, type POLYBEND PBN-14-C,
for bending stirrups from coil or for producing straight bars from coil.
Year of manufacture 1999
Wire on coils can be used from 6 mm up to 14 mm.
Catalogue of stirrup bending shapes stored in the computer
– 2 decoiler
– Barcode scanner
– 4 bending mandrels
Still in operation.
EVG PBN 14C
Rebar Double Bender, Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 14m
Year: 2010
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds
Robomaster Schnell
Rebar Double Bender, Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 12m
Year: 2006
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds
SCHNELL Robomaster
Straightening and cutting line with DBE
Built in 2007, with 2 movable bending heads on the outfeed conveyor (DBE)
4 wire tracks for wire diameters: from 6-16mm
Production direction from left to right
CONDITION
In very good condition!, regularly maintained.
APPLICATION
In precast concrete plants or rebar shops.
Production of bars up to 12m in length
Production of bars with bent ends at the front and back
VIDEO Link Youtube
https://youtu.be/8tKAxdV1dfU
TECHNICAL DATA
Mains: 380V/50Hz
4 electrically driven wire decoilers for 3000kg coils 6-16mm
Fully automatic wire diameter change by moving the rotor table
4 wire lines, each with a hyperbolic rotor and an electric motor in use
Any diameter, length, bending shape and quantity can be selected
Bending device:
Servo-electric drives.
Bending legs up to 1.2m long
Ejection of the cut rods into 2 automatically folding collecting compartments and two further fixed compartments below
Flying shears for optimum production speed, does not interrupt the forward movement of the wire
EVG RA-XE 16/4
Sandwich Wall Production with 4 Pallets
Bridgecrane Stahl
Track width: 22100mm
Load capacity: 5 tonnes
Year of construction 2005
Incl. trolley chassis
5to Bridge Crane
Brand ABUS
Year of construction 1988
Crane type ELK
track width: 22100mm
Load capacity: 10 tonnes
Total weight: 7940kg
Trolley running gear:
Trolley weight: 830kg
10to Bridge Crane
Precast Tables 4.60m x 6.50m
Set of 6 pieces fixed casting tables with vibrators for precast elements
Flat steel sheet and heating pipes
5 vibrators per table
consists of:
3 pieces precast casting table
Shuttering plate dimensions 4.60 x 6.50m
weight approx. 5to
1 piece precast casting table
Shuttering plate dimension 4.60 x 7.00m
Weight approx. 5to
1 piece precast casting table
Shuttering plate dimension 3.80 x 5.00m
Weight approx. 4to
1 piece precast casting table
Shuttering plate dimension 3.80 x 6.34m
Weight approx. 4to
Casting Tables
Bar Cut & Bend Centre
3 pcs Tilting Table S5-750h
Year 2018
3.8m x 13.5m
max. load 750 kg/m2
2 pcs Tilting Table S5-750h
Year 2018
4.2m x 13.5m
max. load 750 kg/m2
Hydraulic Tilting Tables M24528
| Pos | Length meter | Quantity (pcs) | Total running metres | Magnete |
| 1 | 3.00 | 24 | 72 | no magnets |
| 2a | 3.00 | 42 | 126 | Built-in magnets |
| 2b | 3.00 | 40 | 120 | Built-in magnets |
| 3 | 1.00 | 28 | 28 | Built-in magnets |
| 4 | 1.50 | 28 | 42 | Built-in magnets |
| 5 | 2.00 | 28 | 56 | Built-in magnets |
| 444m |
VIDEO LINK WECKENMANN A-Serie
https://www.youtube.com/watch?v=VyF6k15IHVI
SHUTTERS WECKENMANN
Mesh cutter HAMBI
Year of manufacture: 2006
Make: HAMBI Gigant 6000
Working width: 6,20m
max. output:
12 mm ø single bar x
50 mm bar spacing
12 mm ø double bar x
100 mm bar spacing
M23500 Hambi mesh Cut
Full equipment for the production of concrete pipes and reinforced concrete pipes, manhole rings and cones.
Manufactured by SBM/ Austria 2007
-production of big pipes Height=2500mm, External diameter – max. 3,000 mm
– production of concrete and reinforced concrete rings and cones for manholes
-complete sets of moulds for concrete pipes, manhole rings and cones
Condition: Very good, almost not used
Concrete Pipe Production
HAMBI Mesh bending machine
Type: MBH601V
Year: 2011
Working width: 6m
Drive power: 400V/50Hz, 7,5 KW
bar diameter: 6 – 12mm
Machine dimensions: 6700 x 800 x 1000mm
Weight: 1550kg
Hambi Mesh Bender
Manufacturer: TEKSAM Denmark
Year of manufacture: 2016
Condition: As good as new
Suitable for products up to 5m length, 1,25m width and max. product height of 900mm
Possible finished products: Slatted floors, pavers, U-channels, posts, foundation blocks etc.
Complete production cycle with tilt forming machine, demolding crane, transport system, set-down device
and production pallets.
The plant assemblies:
-Automatic production machine
-Demolding crane
-Transport system for the products
-Settling device
-70 steel pallets for a product area of 5.000 x 1.125mm and a load of 3.500 kg
Tilt Forming Machine TEKSAM
Filigran Floor and Twin-Wall Carousel
Manufacturer : SKAKO
Control system : OSD Schenk
Master computer: SAA
Daily output: approx. 750 – 800 sqm/day
PALLETS
80 steel pallets (moulds): Dimension: 3 x 9m and 2.5 x 14m,
Pallets are transported from station to station by roller blocks, driven by friction wheel,
Condition of the pallets: “Very good”
Complete Plant
Carousel
Planetary Mixer ARCEN
LIEBHERR mixer
Folding pallet for the production of double walls or other prefabricated parts
Manufacturer: SOMMER
Year of construction: 2003
Dimensions: 7.00m x 3.08m
Wall thicknesses adjustable: from 18cm to 40cm
Edge formwork height: 6cm
Folding Pallet for Twin Wall Production
Manufacturer: Progress
Year of manufacture: 2009
Lattice girder types: KT 800,
lattice girder heights : 70mm – 360mm
Storage length: 14m
Measuring length max: 10m
Measuring length min: 0,8m
Cutting grid: 100mm
System Components:
Pos 1 Lattice girder top chord welding machine
Pos 2 Electrical equipment and control system
Pos 3 Communication programme
Pos 4 Lattice girder transport traverse
Pos 5 Lattice girder active storage
Pos 6 Lattice girder active storage system with automatic handling traverse
Pos 7 Vertical transport lattice girder
Pos 8 Automatically cross-travelling positioning carriage
Pos 9 Longitudinal positioning unit
Pos 10 Lattice girder cutting machine
Lattice Girder Cut & Weld
AAC Plant
Sign up to our newsletter and to keep up to date on our latest offers and services.