PROGRESS MSR 20 Straightening Machine

• Straightening and cutting from wire coils
• Max. Production speed: 160m/min
• Wire diameter: 8 – 20mm
• 6 wire diameters guided in parallel
• Automatic and immediate selection of wire diameter
• Finished wire rod length: 500 mm to 14000 mm
• Rotor straightening system with hyperbolic straightening rollers (no damage to the wire surface)

Lattice Girder Welding Machine

Rare machine for producing standard lattice girders and shear force lattice girders (German Market).

• Year: 2009
• Lattice girder welding line with variable feed 190 – 210 mm
• Type: GH400V-ST
• V stands for: Adjustable stroke (feed) between 190 and 210mm,
• ST stands for: Shearforce Lattice Girder
• Lattice girder height adjustable between 70 – 400 mm
• Minimum beam length: 0.8 m
• Max. Beam length: 16.0 m
• Basic width during production: 58 mm (inside diagonal dimensions)
• Finished beam width: 70 – 116 mm (outer dimension of bottom chords)
• Wire diameter upper chord: 5 – 16 mm
• Lower chord: 5 – 16 mm
• Diagonale: 4.5 – 9 mm

VIDEO-LINK:
FRONTSIDE-VIDEO: https://cloudlogin02.world4you.com/index.php/s/eZvgxj1nDPeyEoK

BACKSIDE-VIDEO: https://cloudlogin02.world4you.com/index.php/s/8Mrrzl4i3n0O3m1

BVM Rebar Shearline

With pull-in system for bar diameters up to
40 mm.

• Built: 2006
• Model: HBSA-2.7H
• Serial No: 304
• Length: 16.7m
• Width: 2.25m
• Height: 2.40m
• Fully operational.

VIDEO-LINK: https://youtu.be/LEzZFOrVP0k

Rotor Straightening and Cutting unit EVG-FILZMOSER RA-XE 16/5

Straightening and cutting machine with double bending device 2 x 16 mm.

•  Year of construction: 2004
• 2 movable bending heads at the outlet track
• 5 wire tracks for wire diameter: 6-16 mm
• Production direction from right to left

CONDITION

• In excellent condition, regularly maintained.

AREA OF APPLICATION

• In the precast concrete plant or the steel shop.
• Production of bars up to 12,5 m length.
• Production of bars with bent ends.

EUROBEND Straightening, Cutting, and Stirrup Bending Machine

• Brand: Eurobend
• Type: MELC 18-4-CNC
• Year of construction: 2006
• 4-lane rotor roller wire straightening machine
• Straightening system: Hyperbolic rotor rollers (gentle to the wire surface)
• 4 flying shears
• Wire diameter: 8, 10, 12, 16 mm
• Suitable for 5-tonne coils
• Parallel operation of several lanes is possible

VIDEO LINK YouTube:

https://youtu.be/6UULVt4ehT8

Straightening and Bending Stirrups

• Straightening and Bending Stirrups
• FIL-Betasystems COMBI 14/5
  Year of manufacture 1997
• Wire diameter from D=6mm to D=14mm
• 5 wire reels
• Automatic diameter change
• New Siemens PLC control system installed in summer 2019
• plus 6 picking trolleys that can be transported to the production tables
• The control system enables the production of straight wires from the spool, in diameters 6-14mm

Rotor Straightening Machine EVG/FILZMOSER RA-XE 14/5

• Year of manufacture: 2001
• Electric rotor directional drives
• Well-maintained system! Little used.

Includes:

• 5 roller rotor devices with electric drive
• Wire quick-change device
• Production direction: from right to left
• Max. feed speed: up to 140 m/min
• 5 electrically driven wire decoilers
• Protective fence in the area of the wire decoilers
• Wire run-out track for max. bar length
  10 m
• Beckhoff control: operable in manual and automatic mode

Sales Price: EUR 49.500,00

EVG-FIL Lattice girder welding line with variable feed 190 – 210 mm

WATCH VIDEO

• Type: FILZMOSER GH300V
• Condition: Very well maintained
• Lattice girder height: adjustable between 70 – 300 mm
• Adjustable stroke (feed): between 190 and 210 mm
• Wires: 5-14 mm
  Welding transformers: 250 KVA
• 1 pc automatic girder run-off and stacking system: 12 m

The machine is in full operation and can be inspected during daily production. 

SCHNELL Barwiser Stirrup Bender A8300

• Make: SCHNELL Barwiser
• Year: 2004
• Diameters: 10, 12, 16, 20, 22 mm
• Accessories: Multi-chamber storage system
  
• Condition: Excellent, currently installed and used in the factory

SCHNELL Robomaster

Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 12m
Year: 2006
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds
– inludes various bending mandrels

Rotor straightening machine RA-XE 16-8-2 

Powerful rotor straightening machine with
8 tracks (8 different diameters) and
2 flying shears
Manufacture of straightened bars up to 14m from the wire coil
Built in 2005
Wire diameter from 8mm to 16mm

Special technical features:
1. Fully automatic diameter change
2. Constant access to all diameters
3. 2 flying shears in parallel operation, guaranteeing high performance

• interested in innovative projects?
  www.preqast.com

EVG-BVM Rebar Shearline

with Pull-In System

for bar diameters up to 40mm
Built in 2011

Length 16.7m
Width 2.25m
Height 2.40m
Fully operational
Available from January 2025

Rebar Double Bender

Rebar Double Bender, Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 14m
Year: 2010
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds

Robomaster Rebar Double Bender

Rebar Double Bender, Automatic double bending machine for bars up to Ø 50 mm (#14).
It works automatically and bends any kind of shapes, positive and negative bends included.
Roller conveyour length 12m
Year: 2006
– Automatic system for bars feeding and discharging
– Ejection cylinder: pneumatic ejector for shapes and mandrels to remove the tools from the toothed part
– Operation by means of digital electric servomotors
– 4 adjustable bending speeds

EVG-FILZMOSER RA-XE 16/4 rotor

Straightening and cutting line with DBE
Built in 2007, with 2 movable bending heads on the outfeed conveyor (DBE)
4 wire tracks for wire diameters: from 6-16mm
Production direction from left to right

CONDITION
In very good condition!, regularly maintained.

APPLICATION
In precast concrete plants or rebar shops.
Production of bars up to 12m in length
Production of bars with bent ends at the front and back

VIDEO Link Youtube
https://youtu.be/8tKAxdV1dfU

TECHNICAL DATA
Mains: 380V/50Hz
4 electrically driven wire decoilers for 3000kg coils 6-16mm
Fully automatic wire diameter change by moving the rotor table
4 wire lines, each with a hyperbolic rotor and an electric motor in use
Any diameter, length, bending shape and quantity can be selected
Bending device:
Servo-electric drives.
Bending legs up to 1.2m long
Ejection of the cut rods into 2 automatically folding collecting compartments and two further fixed compartments below
Flying shears for optimum production speed, does not interrupt the forward movement of the wire

Mesh cutter HAMBI

Year of manufacture: 2006
Make: HAMBI Gigant 6000
Working width: 6,20m
max. output:
12 mm ø single bar x
50 mm bar spacing
12 mm ø double bar x
100 mm bar spacing

HAMBI Mesh bending machine

Type: MBH601V
Year: 2011
Working width: 6m
Drive power: 400V/50Hz, 7,5 KW
bar diameter: 6 – 12mm

Machine dimensions: 6700 x 800 x 1000mm
Weight: 1550kg

Lattice girder welding line:

Type: EVG/FIL GH300,
Fully refurbished inYear 2019, built 1995

VIDEO

Lattice girder height adjustable between 70 – 300mm, 2,75″ – 11,8″
Upper bar: 5-14mm, #2 #3 #4
Diagonal: 5-7mm, #2
Lower bars: 5-14mm, #2 #3 #4
Base: 58, 70 and 80mm, 2.28″, 2.76″, 3.15″
Coils: up to 3 tons
Operating direction: from left to right
Power supply: 400 V, 50 Hz, 335kVA (2x150kVA)
Standard power at 50% switched on,
Power Hydraulic: 37 kW

LATTICE GIRDER PRODUCTION

Output max.: 33 m/min
Lattice girder height: 80-300 mm (easily variable; precise motorized vertical regulation)
L.G. base (internal size) : 70-100 mm
Advance step:   400 mm
Lattice girder length: 2000-12000 mm (multiples of 100 mm)

DIAMETER OF THE WIRE:
Longitudinal wire Ø: 5-12 mm
Continuous stirrup (zigzag) Ø: 3.5-6 mm
(fy = 650 N/mm2 – ft = 650 N/mm2)

2009: Comprehensive update of the entire electrics/electronics
2014: Comprehensive update of the entire mechanic systems, repainting. Now it looks as if it was new!

Stirrup Bender EVG PBN-16C

Used EVG stirrup bending machine, type POLYBEND PBN-16-C,
for bending stirrups from coil or for producing straight bars from coil.
Year of manufacture 1999

Wire on coils can be used from 6 mm up to 16 mm.
Catalogue of stirrup bending shapes stored in the computer
– 2 decoiler
– Barcode scanner
– 4 bending mandrels

Still in operation.

Cold Rolling Line GCR MTO 760/2

Year of Construction 2009

Consists of:
SVD/2 Coil Pay-off
RD 140/2 Mechanical Descaler
SA-CLR Soap Applicator
MTO 760 Cold Rolling Machine B
OM 1250 Spooler
Wire direction: from left to right
Process material: less carbon steel wire C = 0.10% max.
Input diameter: 16.0 to 5.5mm
Output diameter: 14.0 to 4.0mm, cold rolled ribbed concrete steel
Intake material load: up to 550 Mpa
Max. speed: 11.0 m/sec
Noise level: less than 82 dBA
Total weight approx. 29,800 kg
Total power: 555 kW
Cassettes: Four cassettes (two inbound and two finishing cassettes)

Mesh-Welding Line EVG GE12/102-LTPV

Year of construction 2009

Output: 110 Weldingcycles per minute (equal to 110 Transversal bars per minute)

Max. shape of the produced wire mesh: 2.40m x 7.80m

Long bars and transversal bars are fed by prepared bars

Straightening and Cutting of the bars is done by 2 EVG Cutting lines which work from coil

On demand there is a Cold Rolling Line with 2 blocks available which is suits to the capacity of the mesh welding line.

Pile Cage Welder

Controlled by only one person.
Output: max. 4m per minute, but only ever run it at 2m per minute.
8 Rebar pay-off stations, with straighteners

The 5mm welded helical can be programmed to vary the leg frequency to provide closer centres at the pile ends and then transitioning to wider centres in the middle. There is a cutting station that moves automatically at the same speed as the cage and an automatic off load station that handles cages up to 15m long.

EVG Polybend for SALE

A used EVG Stirrup bender, type POLYBEND PBN-16-C,  used for bending stirrups from coil or produce straight bars from coil.
Wire on coils can be used from 6mm up to 16mm.
Catalog of stirrup bending shapes stored in computer.
– 2 wire pay-offs
– Barcode Scanner
– 4 bending mandrels

MEP PREFORM C+P

Year 2005
Excellent condition, refurbished and revised
Dimensions: 15,000 x 4,000 mm
Reinforcing cage dimension: Minimum 150 x 150 mm, maximum 1000 x 1000 x 8000 mmm
Stirrups diameter: 4-16 mm
Longitudinal wire: 4 to 6 mm
Minimum/Maximum pitch: 50-500 mm
Peak power absorbed: 35 kVA
Normal consumption: 5,5 kVA
Includes: 3 wire pay-offs

Straightening and cutting machine

Type: RA100/5
Automatic diameter adjustment
All diameters available at any time

– Control B&R
– 5 pcs. wire pay-offs, diameter 6-14mm
– hydraulic unit
– outfeed track: 10m length
– Double bending device for cranking up the ends

EVG Stirrup Bender

Stirrup bender to produce stirrups and bars.

Year: 2007

Automatic setting of wire guides and straighteners.
Condition: very good, machine cleaned and all straightening and driving rollers changed to new ones!

Wire diameter ranges for single wire: 6,0 – 16,0 mm
Wire diameter ranges for double wire: 6,0 – 12,0 mm

RA-XE 16/6 Straightening and Bending

FOR SALE
Rotor straightening and cutting machine EVG-FILZMOSER RA-XE 16/6 with double bending
Year of construction 1999, with 2 movable bending heads at the outfeed table
6 wire tracks for wire diameter: 6-16mm
Production direction from left to right
In very good condition, regularly serviced by EVG-FILZMOSER